Manual

Technical Data 21 (26)
8 Technical Data
Dimensions 114.5 x 99 x 22.5 mm
Weight
Approx. 150 g
Operating temperature
-40 °C to +85 °C
Storage temperature
-40 °C to +85 °C
Power supply 9 V to 36 V DC with overvoltage and polarity
protection
Current consumption
Typically 110 mA at 24 V input voltage,
typically 220 mA at 12 V input voltage
Housing material Polyamide
Galvanic isolation 1 kV DC for 1 sec
Protection class
IP20
CAN bit rates (CAN 1/CAN2) 5 kbit/s to 1000 kbit/s
CAN FD bit rates (CAN3/CAN4 withCANbridge NT 420) Arbitration rate: up to 1000 kbit/s, data rate: up to
8000 kbit/s (verified by testing)
User defined bit rates are possible. Depending on the
operating conditions (cable length, settings made,
remote stations, etc.) the maximum data might not be
reached or exceeded.
Max. number of bus nodes
120
CAN bus termination resistor
None
CAN pass through delay 25-50 μs depending on configuration settings and CAN
load
Startup time after power on
< 1 s
Processing time in Bridge mode
30 000-40000 msg/s
Startup time
Min. 225 ms (configuration size 5 kB), max. 765 ms
(configuration size 140 kB)
CANbridge NT User Manual
4.01.0331.20000 1.9 en-US