Manual

Product Description 7 (26)
4.3 Operational Modes
4.3.1 Repeater/Star Coupler
The CANbridge NT 200 can be configured as Repeater and the CANbridge NT 420 as Star Coupler.
In the Repeater/Star Coupler mode all messages are transmitted unchanged to the other ports in
Classic CAN mode. Filters, CAN-ID modifications and CAN-FD mode are not possible.
The following settings and features are possible:
• Expert mode
• Communication Error Severity
• Action Rules
4.3.2 Bridge
The Bridge mode allows free configuration of the transmission of CAN messages. With the
CANbridge NT 420 NT bridging between Classic CAN and CAN FD is possible.
The following settings and features are possible:
• Use of Lua ADK
• Expert mode
• Communication Error Severity
• Action Rules
• Mapping table
• J1939 Mapping
• CAN FD/CAN Demultiplexing (only CANbridge NT 420)
• CAN/CAN FD Multiplexing (only CANbridge NT 420)
• Cyclic transmission
• CAN tunnel to transmit messages between two Classic CAN networks via a CAN FD network
(only CANbridge NT 420)
4.4 Add-Ons for Customer Specific Expansions
4.4.1 Lua ADK
With the Lua Application Development Kit customer specific Lua scripts can be executed on the
CANbridge NTin operational mode Bridge. By using the Lua ADK for handling and processing of
communication data the functionality of the standard application can be expanded.
For more information about the Lua ADK see User Manual CAN@net NT/CANbridge NT Lua ADK
on the product support pages on www.ixxat.com/support-bridges-gateways.
CANbridge NT User Manual
4.01.0331.20000 1.9 en-US