Instructions

List of Error Codes 24 (26)
7 List of Error Codes
Error number Error description
0
Unknown error ‘<error_code>’
1
CAN <port_num> baud rate not found
2
CAN <port_num> stop failed
3
CAN <port_num> start failed
4
CAN <port_num> extended filter is full
5
CAN <port_num> standard open filter set twice
6
CAN <port_num> standard filter is full
7
CAN <port_num> invalid identifier or mask for filter add
8
CAN <port_num> baud rate detection is busy
9
CAN <port_num> invalid parameter type
10
CAN <port_num> invalid CAN state
11
CAN <port_num> invalid parameter mode
12
CAN <port_num> invalid port number
13
CAN <port_num> init auto baud failed
14
CAN <port_num> filter parameter is missing
15
CAN <port_num> bus off parameter is missing
16 CAN <port_num> parameter is missing
17 DEV parameter is missing
18
CAN <port_num> invalid parameter brp
19
CAN <port_num> invalid parameter sjw
20
CAN <port_num> invalid parameter tSeg1
21
CAN <port_num> invalid parameter tSeg2
22
CAN <port_num> init custom failed
23
CAN <port_num> init failed
24
CAN <port_num> reset failed
25
CAN <port_num> filter parameter is missing
- -
27 CYC parameter is missing
28
CYC message <msg_num> stop failed
29
CYC message <msg_num> init failed
30
CYC message <msg_num> invalid parameter port
31
CYC message <msg_num> invalid parameter msg_num
32
CYC message <msg_num> invalid parameter time
33
CYC message <msg_num> invalid parameter data
CAN@net NT 200/420 Software Design Guide
4.02.0332.20000 1.5 en-US