Datasheet

V1.0
www.ixxat.com
Page 1 of 3
The Ixxat USB-to-CAN FD automotive with two switchable CAN
FD/CAN high-speed channels, LIN and galvanic isolation is a
super easy, robust, versatile, and cost-efficient way to connect a
computer to CAN FD/LIN bus networks. It is a very reliable
workhorse for CAN FD applications e.g. in the field of
automotive, mobility, test, development, maintenance or
control applications.
Galvanic isolation reliably enhances the protection of the device
against damage to electronics caused by voltage peaks.
Two RJ45 to D-Sub 9 adapter cables are included.
FEATURES AND BENEFITS
ORDER NUMBER 1.01.0353.22012
CAN FD / CAN channels 2
CAN bus interface 2 x RJ45 (incl. 2 x D-Sub 9-Adapter with CiA standard pinning according to
CiA 303-1)
CAN bit rates 10 kbit/s to 1 Mbit/s
CAN FD bit rates 250/500 kbit/s arbitration rate with 500 to 80000 kbit/s data rate
(predefined), user defined bitrate is possible.
CAN bus termination resistors None
CAN controller IFI CAN_FD IP/80 MHz
CAN, CAN FD and LIN in one device
■
Cost-effective and extremely versatile
■
High-precision time-stamp accuracy
■
High data throughput combined with low latency
■
Native USB 2.0 hi-speed (480 MBit/s), compatible with USB 1.1 and
USB 3.x
■
Galvanic isolation
■
2 x CAN FD connection up to 8 Mbit/s with 2 x RJ45 sockets
■
1 x LIN communication in master or slave mode
■
LIN frame format switchable
■
Power is taken from the USB bus
■
2 x RJ45 to 9-pin D-Sub adapter cables included
■
Common driver interface for easy exchange of the PC interface type
■
Powerful programming interface for Windows (VCI) as well as for Linux
(socketCAN or ECI), QNX and VxWorks (ECI)
■
DATASHEET
USB-to-CAN FD automotive