USB-to-CANFD Compact | Embedded | Automotive | PCIe Mini USER MANUAL 4.01.0350.20000 1.
Important User Information Disclaimer The information in this document is for informational purposes only. Please inform HMS Industrial Networks of any inaccuracies or omissions found in this document. HMS Industrial Networks disclaims any responsibility or liability for any errors that may appear in this document. HMS Industrial Networks reserves the right to modify its products in line with its policy of continuous product development.
Table of Contents 1 2 Page User Guide ........................................................................................................................... 3 1.1 Target Audience...............................................................................................................3 1.2 Related Documents ..........................................................................................................3 1.3 Document History .........................................................
9 Troubleshooting ................................................................................................................ 17 10 Cleaning ............................................................................................................................. 18 11 Support/Return Hardware................................................................................................ 18 11.1 Support ...............................................................................................
User Guide 1 3 (22) User Guide Please read the manual carefully. Make sure you fully understand the manual before using the product. 1.1 Target Audience This manual addresses trained personnel who are familiar with CAN, CAN FD, LIN and the applicable standards. Only ESD trained staff is authorized to install the interface. The contents of the manual must be made available to any person authorized to use or operate the product. 1.2 1.
User Guide 1.5 4 (22) Conventions Instructions and results are structured as follows: ► instruction 1 ► instruction 2 → result 1 → result 2 Lists are structured as follows: • item 1 • item 2 Bold typeface indicates interactive parts such as connectors and switches on the hardware, or menus and buttons in a graphical user interface. This font is used to indicate program code and other kinds of data input/output such as configuration scripts.
Safety Instructions 5 (22) 2 Safety Instructions 2.1 Information on EMC Risk of interference to radio and television if used in office or home environment! The product is a class B device. Use exclusively included accessories or HMS accessories that are intended for use with the device. Use exclusively shielded cables. Make sure that the shield of the interface is connected with the device plug and the plug on the other side. 2.2 2.
Product Description 4 6 (22) Product Description The USB-to-CANFD is an active USB interface which enables the user to monitor and control up to two ISO CAN FD or non-ISO CAN FD or CAN High Speed channels and a LIN channel, depending on the variant. 4.1 USB-to-CANFD Compact/Embedded Fig. 1 USB-to-CANFD embedded and compact (D-Sub 9) • USB 2.
Product Description 4.2 7 (22) USB-to-CANFD Automotive Fig. 2 USB-to-CANFD automotive • USB 2.0 Hi-Speed (480 MBit/s) • 2 x CAN FD interface with three operation modes: – ISO CAN FD according ISO 11898-1: 2015 – non-ISO CAN FD – CAN high-speed according ISO 11898-2: 2016 Operation mode can be set for each port individually. • 1 x LIN interface V1.3 and V2.0/2.
Product Description 4.3 8 (22) USB-to-CANFD PCIe Mini Fig. 3 USB-to-CANFD PCIe Mini • USB 2.0 Hi-Speed (480 MBit/s) via PCIe Mini (if supported by computer in use) • galvanic CAN bus isolation • CAN FD interface with three operation modes: – ISO CAN FD according ISO 11898-1: 2015 – non-ISO CAN FD – CAN high-speed according ISO 11898-2: 2016 Operation mode can be set for each port individually. • LIN interface V1.3 and V2.0/2.
Installation 9 (22) 5 Installation 5.1 Installing the Software For the operation of the interface a driver is needed. The USB-to-CANFD is only supported by VCI V4 or newer. Windows ► Install the VCI driver (see Installation Guide VCI Driver). Linux and Real-Time Operating Systems ► Observe information about supported operating systems and interfaces on www.ixxat.com. 5.2 Installing the Hardware 5.2.
Installation 10 (22) USB-to-CANFD Embedded Risk of ESD damages caused by improper handling! Use ESD protective measures to avoid equipment damage. Damage of the equipment because of reverse polarity or wrong type of power supply! Make sure that the power supply is correctly connected and of recommend type. Connector: • USB cable with 5 pin female connector • Assignment corresponds to PC standard for internal USB devices. 1 2 3 4 5 Fig.
Installation 11 (22) USB-to-CANFD PCIe Mini Fig. 5 PCIe connector ► Make sure that the computer in use supports USB via PCIe Mini. ► Make sure that the driver is installed. ► Turn off the computer. ► Pull the power cord. ► Open the computer case according to the instructions of the computer manufacturer. ► Determine the corresponding slot. ► Plug the PCIe connector (1) in the corresponding slot, without using force. ► Make sure that the interface is securely held in the computer.
Installation 12 (22) USB-to-CANFD Automotive Pin Allocation RJ45, Pin No. Adapter cable Signal CAN 1 CAN 2/LIN D-Sub 9, Pin No. CAN high 1 1 7 CAN low 2 2 2 CAN GND 3, 7 3, 6 LIN 3, 7 - 6 5 VBATLIN - 8 9 USB-to-CANFD PCIe Mini The CAN connector type is SM03B-SURS-TF by JST. The counterpart is 03SUR-32S by JST. A preassembled open-style cable for each CAN and LIN connector is included. Fig.
Installation 13 (22) ► In canAnalyser adjust the USB-to-CANFD properties according to fieldbus characteristics: Devices which only support CAN 2.0 (CAN high-speed) destroy CAN FD telegrams! Only use CAN FD format in networks purely using CAN FD devices or with CAN 2.0 devices unplugged or switched to standby. – To activate CAN FD, activate the checkbox Use CAN FD format. – To use ISO CAN FD frames, activate the checkbox Use ISO conform frame.
Operation 6 14 (22) Operation The implemented LEDs vary dependent on the variant of the USB-to-CANFD. The PCIe Mini has no LEDs. LED Arrays of the Different Variants Compact Automotive USB USB CAN CAN1 CAN2 LIN 6.1 USB LED The USB LED reflects the status of the USB communication. 6.2 LED state Description Comments Off No communication Device not initialized, check power supply. Device not connected to USB port. Green Communication possible Device is ready for use.
Additional Components 15 (22) 7 Additional Components 7.1 CAN Bus Termination In the interface is no bus termination resistor for the CAN bus integrated. HMS Industrial Networks offers a bus termination resistor as a feed through connector. Fig. 7 ► 7.2 CAN bus termination resistor For ordering information see www.ixxat.com. Adapter Cable HMS Industrial Networks offers a RJ45 to D-Sub 9 adapter cable. Fig. 8 ► Adapter cable For ordering information see www.ixxat.com.
Technical Data 16 (22) 8 Technical Data 8.1 Compact/Embedded/Automotive 8.2 USB interface USB 2.0, Hi-Speed (480 MBit/s) Microcontroller/RAM/Flash 32 Bit/192 kByte/512 kByte CAN controller/clock frequency IFI CAN_FD IP/80 MHz CAN bitrates 10 kbit/s to 1 Mbit/s CAN FD bitrates 250/500 kbit/s arbitration rate with 500 to 10000 kbit/s data rate (predefined), user defined bitrate is possible. CAN/CAN FD transceiver Microchip MCP2562FDT CAN bus termination None LIN bitrates Max.
Troubleshooting 9 17 (22) Troubleshooting USB LED is off after installation. ► Make sure that the device is correctly connected to the USB port. ► Check the power supply. ► Make sure that device and driver are correctly initialized. ► Make sure that the correct driver version is installed (VCI V4 or higher). ► Check if the correct VCI driver version is installed. Adapter cable is not according to specification. ► Use an adapter cable according to the specification.
Cleaning 10 11 18 (22) Cleaning ► Disconnect the device from the power supply. ► Remove dirt with a soft, chemical untreated, dry cloth. Support/Return Hardware Observe the following information in the support area on www.ixxat.com: 11.1 11.2 12 • information about products • FAQ lists • installation notes • updated product versions • updates Support ► For problems or support with the product request support at www.ixxat.com/support. ► If required use support phone contacts on www.
Appendix A: Regulatory Compliance 19 (22) A Regulatory Compliance A.1 EMC Compliance (CE) The product is in compliance with the Electromagnetic Compatibility Directive. More information and the Declaration of Conformity is found at www.ixxat.com. A.2 FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference.
Appendix A: Regulatory Compliance A.3 20 (22) Disposal and recycling You must dispose of this product properly according to local laws and regulations. Because this product contains electronic components, it must be disposed of separately from household waste. When this product reaches its end of life, contact local authorities to learn about disposal and recycling options, or simply drop it off at your local HMS office or return it to HMS. For more information, see www.hms-networks.com.
This page intentionally left blank
last page © 2019 HMS Industrial Networks Box 4126 300 04 Halmstad, Sweden info@hms.se 4.01.0350.20000 1.
