Datasheet

ManualsBrandsIxys ManualsMOSFET RelaysMOSFET Relay OptoMOS LBA, DIP-8, 1NO + 1NC, 350V, 120mA

LBA110

Dual Pole OptoMOS

Relay

www.clare.com

DS-LBA110-R07

Part # Description

LBA110 8-Pin DIP (50/Tube)

LBA110S 8-Pin Surface Mount (50/Tube)

LBA110STR 8-Pin Surface Mount (1,000/Reel)

LBA110P 8-Pin Flat Pack (50/Tube)

LBA110PTR 8-Pin Flat Pack (1,000/Reel)

Parameter Ratings Units

Blocking Voltage 350 V

Load Current 120 mA

Max R

Ω

Applications

Features

Description

Approvals

Ordering Information

Pin Configuration

• 100% Solid State

• Low Drive Power Requirements (TTL/CMOS

Compatible)

• Arc-Free With No Snubbing Circuits

• 3750V

rms

Input/Output Isolation

• FCC Compatible

• VDE Compatible

• No EMI/RFI Generation

• Machine Insertable, Wave Solderable

• Telecommunications

• Telecom Switching

• Tip/Ring Circuits

• Modem Switching (Laptop, Notebook, Pocket Size)

• Hook Switch

• Dial Pulsing

• Ground Start

• Ringing Injection

• Instrumentation

• Multiplexers

• Data Acquisition

• Electronic Switching

• I/O Subsystems

• Meters (Watt-Hour, Water, Gas)

• Medical Equipment-Patient/Equipment Isolation

• Security

• Aerospace

• Industrial Controls

LBA110 is 350V, 120mA, 35Ω independent 1-Form-A

and 1-Form-B relays. It is designed to provide an

ideal solution where a complimentary Form-A/Form-B

relay pair is required.

• UL Recognized: File Number E76270

• CSA Certified: File Number LR 43639-10

• EN/IEC 60950-1:2001 Compliant

RoHS

2002/95/EC

Switching Characteristics

of Normally Closed

(Form B) Devices

+ Control - Normally Closed

– Control - Normally Closed

+ Control - Normally Open

– Control - Normally Open

Normally Closed Pole

Normally Open Pole

CONTROL

10%

90%

OFF

LOAD

CONTROL

LOAD

10%

90%

OFF

Switching Characteristics

of Normally Open

(Form A) Devices

Summary of content (7 pages)

PAGE 1
LBA110 Dual Pole OptoMOS® Relay Parameter Blocking Voltage Ratings 350 Units VP Load Current 120 Max RON 35 mA Ω Description LBA110 is 350V, 120mA, 35Ω independent 1-Form-A and 1-Form-B relays. It is designed to provide an ideal solution where a complimentary Form-A/Form-B relay pair is required.
PAGE 2
LBA110 Absolute Maximum Ratings Parameter Blocking Voltage Ratings 350 Units VP Reverse Input Voltage 5 V Input Control Current 50 mA 1 A 1 150 mW Total Power Dissipation 2 800 mW Peak (10ms) Input Power Dissipation Isolation Voltage, Input to Output 3750 Vrms Operational Temperature -40 to +85 °C Storage Temperature -40 to +125 °C 1 2 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device.
PAGE 3
LBA110 PERFORMANCE DATA* 35 30 30 25 20 15 10 5 0 LBA110 - FormA Typical On-resistance Distribution (N=50 Ambient Temperature = 25°C) (Load Current = 120mADC, IF = 5mADC) 25 20 15 10 5 1.17 1.19 1.21 1.23 0 1.25 19.5 20.5 21.5 LED Forward Voltage Drop (V) LBA110 - FormA Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25°C) 30 Device Count (N) Device Count (N) 20 15 10 400 420 440 460 480 500 20 15 10 0 520 25 15 10 5 1.3 1.5 1.7 365 375 385 5 1.
PAGE 4
LBA110 PERFORMANCE DATA* LBA110 - Form A Typical Load Current vs. Temperature 180 15 10 5 180 160 160 140 140 120 100 IF = 20mA IF = 10mA IF = 5mA 80 60 40 Load Current (mA) 20 Load Current (mA) Device Count (N) 25 LBA110 - FormB Typical Turn-Off Time (N=50 Ambient Temperature = 25°C) (Load Current = 120mADC; IF = 5mADC) 120 100 20 0.40 0.56 0.72 0.88 0 1.04 -40 -20 0 Turn-Off (ms) 100 0.008 0.006 0.004 -40 -20 0 20 40 60 1.2 80 100 0.6 IF = 20mA 0.
PAGE 5
LBA110 PERFORMANCE DATA* LBA110 - FormA Typical Turn-Off vs. LED Forward Current (Load Current = 120mADC) 0.42 0.220 0.41 0.215 0.40 0.210 0.39 0.38 0.37 0.36 0.200 0.195 0.190 0.180 0 0 5 10 15 20 25 30 35 40 50 45 LBA110 - FormA Typical On-resistance vs. Temperature (Load Current = 120mADC; IF = 5mADC) 60 0.2 0 5 10 15 20 25 30 35 40 0 50 45 30 20 10 -20 0 20 40 60 80 30 20 10 0 100 -40 -20 0 1.5 1.0 0.5 40 60 80 80 0 1.0 0.
PAGE 6
LBA110 Manufacturing Information Soldering For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents.
PAGE 7
MECHANICAL DIMENSIONS Tape and Reel Packaging for 8-Pin Surface Mount Package 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) 1 8 W = 16.30 max (0.642 max) Bo = 10.30 (0.406) Top Cover Tape P = 12.00 (0.472) Embossed Carrier Embossment K0 = 4.90 (0.193) Ao = 10.30 (0.406) User Direction of Feed K1 = 4.20 (0.165) NOTE: Tape dimensions not shown, comply with JEDEC Standard EIA-481-2 Tape and Reel Packaging for 8-Pin Flatpack Package 330.2 DIA. (13.00 DIA.