Datasheet

ManualsBrandsIxys ManualsMOSFET RelaysMOSFET Relay OptoMOS PLA, DIP-6, 1NO, 400V, 250mA

www.clare.com

PLA140

DS-PLA140-R5

PLA140 is a 400V, 250mA, 8Ω 1-Form-A relay. This per-

formance leader combines high peak load voltage capa-

bility, high peak load current capability, and very low

on-resistance to provide superior performance.

• Instrumentation

• Multiplexers

• Data Acquisition

• Electronic Switching

• I/O Subsystems

• Meters (Watt-Hour, Water, Gas)

• Medical Equipment—Patient/Equipment Isolation

• Security

• Aerospace

• Industrial Controls

• Automotive

• UL Recognized: File Number E76270

• CSA Certified: File Number LR 43639-10

• BSI Certified to:

• BS EN 60950:1992 (BS7002:1992)

Certificate #: 7344

• BS EN 41003:1993

Certificate #: 7344

• Small 6 Pin DIP Package

• Low Drive Power Requirements (TTL/CMOS

Compatible)

• No Moving Parts

• High Reliability

• Arc-Free With No Snubbing Circuits

• 3750V

RMS

Input/Output Isolation

• FCC Compatible

• VDE Compatible

• No EMI/RFI Generation

• Machine Insertable, Wave Solderable

• Surface Mount and Tape & Reel Versions Available

Applications

Features

Description

Approvals

Single Pole OptoMOS

Relay

Ordering Information

Part # Description

PLA140 6 Pin DIP (50/Tube)

PLA140S 6 Pin Surface Mount (50/Tube)

PLA140STR 6 Pin Surface Mount (1,000/Reel)

PLA140 Units

Load Voltage 400 V

Load Current 250 mA

Max R

8 Ω

Pin Configuration

Switching Characteristics of

Normally Open (Form A) Devices

CONTROL

LOAD

10ms

10%

90%

OFF

+ Control

– Control

Do Not Use

Load

Do Not Use

Load

AC/DC Configuration

PLA140 Pinout

+ Control

– Control

Do Not Use

+ Load

– Load

DC Only Configuration

PLA140 Pinout

Summary of content (6 pages)

PAGE 1
PLA140 Single Pole OptoMOS® Relay Load Voltage Load Current Max RON PLA140 400 250 8 Description PLA140 is a 400V, 250mA, 8Ω 1-Form-A relay. This performance leader combines high peak load voltage capability, high peak load current capability, and very low on-resistance to provide superior performance.
PAGE 2
PLA140 Absolute Maximum Ratings (@ 25˚ C) Parameter Input Power Dissipation Input Control Current Peak (10ms) Reverse Input Voltage Total Power Dissipation Isolation Voltage Input to Output Operational Temperature Storage Temperature Soldering Temperature DIP Package Surface Mount Package (10 Seconds Max.) 1 Derate Linearly 1.33 mw/˚C 2 Derate Linearly 6.67 mw/˚C Min - Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device.
PAGE 3
PLA140 PERFORMANCE DATA* 35 PLA140 Typical On-Resistance Distribution (N=50 Ambient Temperature = 25°C) (Load Current = 250mADC; IF = 5mADC) Device Count (N) 25 20 15 10 35 35 30 30 25 20 15 10 5 5 0 0 1.17 1.19 1.21 1.23 5.03 10 5.38 5.73 6.08 6.43 6.78 430 25 20 20 5 0 2.1 2.7 3.3 3.9 15 10 5 4.5 0.9 1.5 Current (mA) 300 Load Current (mA) 350 20 15 10 5 0 2.1 3.3 2.7 0.030 0.042 0.054 0.39 0.
PAGE 4
PLA140 PERFORMANCE DATA* PLA140 Typical Turn-On vs. LED Forward Current (Load Current = 250mADC) 1.6 1.4 50mA 30mA 20mA 10mA 5mA 1.2 1.0 1.0 0.050 0.9 0.045 0.8 0.040 0.7 0.6 0.5 0.4 0.3 0.2 0.8 0 20 40 60 80 100 120 20 40 5 10 15 20 25 30 35 40 45 50 0 5 10 60 80 100 -20 0 20 40 60 80 100 Temperature (°C) PLA140 Typical Load Current vs. Load Voltage (Ambient Temperature = 25°C; IF = 5mADC) 20 25 30 35 40 45 50 PLA140 Typical IF for Switch Dropout vs.
PAGE 5
PLA140 Mechanical Dimensions 8.382 ± .635 (.330 ± .025) 6 Pin DIP Through Hole (Standard) 2.540 ± .127 (.100 ± .005) 7.620 ± .254 (.300 ± .010) 7.239 TYP. (.285) 3.302 (.130) 6.350 ± .127 (.250 ± .005) 9.144 ± .508 (.360 ± .020) 7.620 ± .127 (.300 ± .005) 5.080 ± .127 (.200 ± .005) PC Board Pattern (Top View) 2.540 ± .127 2.540 ± .127 (.100 ± .005) (.100 ± .005) 9.525 ± .254 (.375 ± .010) 6.350 ± .127 (.250 ± .005) 3.302 (.130) 2.540 ± .127 (.100 ± .005) 6.350 ± .127 (.250 ± .005) 9.
PAGE 6
For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc.