Datasheet

ManualsBrandsIxys ManualsRelaysSolid State Relay PS, SPST-NO, 1A, 260V, THT

PS2601

AC Power Switch

www.clare.com

DS-PS2601-R10

RoHS

2002/95/EC

Part # Description

PS2601 4-Lead, 8-Pin, SIP Package (25/Tube)

Parameter Rating Units

AC Operating Voltage 260 V

rms

Load Current 1 A

rms

On-State Voltage Drop

=1A

rms

)

1.2 V

rms

Applications

Features

Description

Ordering Information

Pin Configuration

• Programmable Control

• Process Control

• Power Control Panels

• Remote Switching

• Gas Pump Electronics

• Contactors

• Large Relays

• Solenoids

• Motors

• Heaters

• Load Current up to 1A

rms

(3A

rms

with heat sink)

• Blocking Voltages up to 600V

• 5mA Sensitivity

• Zero-Crossing Detection

• DC Control, AC Output

• Optically Isolated

• TTL and CMOS Compatible

• Low EMI and RFI Generation

• High Noise Immunity

• VDE compatible

• Machine Insertable, Wave Solderable

Approvals

• UL Recognized Component: UL 508

File # E69938

• CSA Certified Component: Certificate # LR43639-8

– LED + LED AC Load AC Load

The PS2601 is an AC Solid State Switch using optical

coupling with dual power SCR outputs to produce an

alternative to optocoupler and Triac circuits. The

PS2601 switches are robust enough to provide a

blocking voltage of up to 600V

and max surge

current rating of 20A. In addition, tightly controlled

zero-cross circuitry ensures switching of AC loads

without the generation of transients. The input and

output circuits are optically coupled to provide

3750V

rms

of isolation and noise immunity between

control and load circuits. As a result the PS2601

is well suited for industrial environments where

electromagnetic interference would disrupt the

operation of electromechanical relays.

Summary of content (4 pages)

PAGE 1
PS2601 AC Power Switch Parameter AC Operating Voltage Load Current On-State Voltage Drop (IL=1Arms) Rating 260 1 1.
PAGE 2
PS2601 Absolute Maximum Ratings (@ 25˚C) Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Package Dissipation 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Derate Linearly 1.33 mW / ºC 2 Derate Linearly 16.6 mW / ºC Min 3750 -40 -40 Max 600 5 100 1 150 1600 +85 +125 Units VP V mA A mW mW Vrms ºC ºC Absolute Maximum Ratings are stress ratings.
PAGE 3
PS2601 PERFORMANCE DATA* PS2601 Load Current, Free Air PS2601 Load Current, Heat Sink 4 0.8 RθJA=60ºC/W 0.6 0.4 0.2 3 2 PS with Thermal Clip freestanding 1 0 0 -40 0 55 85 NOTE: Values apply to TJ=50ºC before Surge 20 15 10 5 0 -40 0 55 Ambient Temperature (ºC) Ambient Temperature (ºC) PS2601 Typical Forward Voltage vs. Temperature PS2601 Typical dV/dt vs. Temperature 1.
PAGE 4
PS2601 MANUFACTURING INFORMATION Soldering For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents.