MP651K AIR PISTOL/ RIFLE INSTRUCTION MANUAL European American Corp. 402 Richard RoadArmory Rockledge, 3855 North U.S. Highway One FL. 32955 Cocoa, Florida 32926 (321) 639-4842 www.eaacorp.com E-mail: eaacorp@eaacorp.com © Copyright EAA Corp.
EAA MODEL: MP651K AIR PISTOL / RIFLE INSTRUCTION MANUAL WARNING AND INSTRUCTION MANUAL PLEASE READ THESE INSTRUCTIONS CAUTION: Air Pistol / Rifles are not toys. This Air Pistol / Rifle is recommended for adult use. Misuse or careless use may cause serious injury or death. This Air Pistol / Rifle is dangerous within 500 yards. Do NOT pressurize or handle your Air Pistol / Rifle before you read and understand the instructions and warnings contained in this manual.
10 LIFE SAVING WARNINGS: 1. Thinking the air Pistol / Rifle is unloaded does not mean it is unloaded. If a Pellet or BB is in the chamber and the Pistol / Rifle has pressurized CO2 cartridge, this Pistol / Rifle can be fired. Always treat your air Pistol / Rifle as if it is loaded. 2. Always point the muzzle of any air Pistol / Rifle in a safe direction whether the Pistol / Rifle is loaded or unloaded... 3. No hands over the muzzle / no way / no time / no how. 4. Only use lead .177 pellets or 4.
grip may cause poor accuracy. Do not over tighten the grip screw. Make sure that the grip is tight to the receiver of the air Pistol / Rifle. 4. The Barrel of your air Pistol / Rifle is made of steel and has groove rifling. Never put the barrel in a position where it could be bent or damaged. A bent barrel will lead to accuracy problems or could even lead to a Pellet or BB being stuck in the barrel. After shooting, always clean the barrel with a light oil. 5.
CHARGING/ PRESSURIZING YOUR AIR PISTOL / RIFLE: A. Make sure that the air Pistol / Rifle is pointed in a safe direction and the trigger safety is on (trigger blocked). Remove the pistol grip or stock ( see above grip or stock info). (SEE Figure 2) B. B. Warning: Before you preform this step make sure that if there is a CO2 cylinder in the frame that all the pressure has been released. At the bottom of the grip you will find a sling swivel.
cylinder make sure the pellet skirts are flush with the ratchet side of the cylinder. Now reinstall the cylinder by pulling the Pellet Cylinder Base Pin Release and insert the cylinder into the cylinder slot and release the Pellet Cylinder Base Pin Release. Make sure that the Pellet Cylinder Base Pin moved into the center of the cylinder.
Never leave a air Pistol / Rifle unattended or where it could fall and fire. If an air Pistol / Rifle is hit sharply or dropped, damage to the internal precision mechanism may result and consequently an accidental firing. Store air Pistol / Rifles and Pellets or BBs separately beyond the reach of children. Make sure the air Pistol / Rifle and lead Pellets or BBs are properly locked and secured so children and un- trained individuals will be denied access.
Use only the correct size lead Pellets or BBs for your air Pistol / Rifle. Do NOT use steel shot or darts. Teach children NOT to touch an air Pistol / Rifle or Pellets or BBs. Remember an air Pistol / Rifle has the capability of taking your life or the life of someone else. Be careful with your air Pistol / Rifle -- an accident is almost always the result of not following basic safety rules.
393
IZH-651K: Valve Unit 1. 2. 3. 4. 5. 6. 7. valve bushing valve locking element valve spring O-ring adapter O-ring IZH-651K: Pistol Component Parts and Assemblies 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25.
