User Manual
Table Of Contents
- Introduction
- What’s New in Nectar 2?
- Authorization
- Quickstart
- Global Menu
- Preset Manager
- Overview Panel
- Input and Output Gain
- Input and Output Meters
- Equalizer Module
- Compressors Module
- De-Esser Module
- Gate Module
- Saturation Module
- Pitch Correction Module
- Harmony Module
- Reverb Module
- FX Module
- Delay Module
- Limiter Module
- Pitch Editor Plug-in
- Breath Control Plug-in
- Preset System
- Spectrum
- History Menu
- CPU Optimization
- Buffer Size Viewer
- Automation
- Setting up MIDI Control
- Setting up ReWire Control
- Delay Compensation
- Keyboard and Mouse Support
- Available Shortcut Keys (PC/MAC)
- Options Menu
- General Options
- Spectrum Options
- Input/Output Options
- EQ/Harmony Options
- Pitch Editor General Options
- Pitch Editor Pitch Options
- Breath Control General Options
- iZotope Customer Support
Available Shortcut Keys (PC/MAC)
Main
Ctrl/Cmd + Shift
+ 1 through 4
Displays options dialogs:
1: General Options
2: Spectrum Options
3: I/O Meter Options
4: EQ Options
Note: Under Mac OS X, 'Cmd+Shift+3' and 'Cmd+Shift+4' are
taken by the operating system and cannot be used to open
Nectar's Meter and EQ Options windows.
Ctrl/Cmd + P
Toggles Preset Manager
Ctrl/Cmd + B
Toggles bypass for all Nectar processing.
EQ
Alt/Opt + click
Apply a bandpass filter at the mouse cursor to "solo" the fre-
quencies under the cursor
Ctrl/Cmd + click
(Windows)
Command +
click (OS X)
Selects multiple EQ bands to adjust them as one group
Shift + click
Constrain mouse movements (dragging an EQ band) in either the
vertical or horizontal direction.
Double click
Double click on a band to reset it to its default position.
Left/Right arrow
keys
Adjust the frequency of a selected band or bands. Use with Shift
key for larger increments.