User Manual

Pitch Editor General Options
Graphics
Enable Meters
Allows you to quickly turn on/off all meters
Show Tooltips
When enabled this allows informational notes to appear when
the cursor/pointer is hovering on top of the features' controls
Frame Rate Limiter
Allows you to set the speed (frames per second) used to dis-
play and update meters. You can increase the frame rate for
smoother animation. If you notice graphics performance prob-
lems in your host application, you can set the FPS value
lower to limit the amount of CPU used fordrawing.
Opacity
Allows you to control the opacity or transparency of the inter-
face. The slider will be disabled in host applications that do
not support this feature.
Dim Controls When
Bypassed
When this option is enabled, modules will be dimmed when
bypassed. This feature helps to remind you when a module is
bypassed, so that you don't make adjustments to a bypassed
module unintentionally.
Host
Delay Com-
pensation
Using some of Nectar 's more CPU intensive settings and
algorithms may result in a delay of the signal. This causes a
delay when listening or mixing down. Fortunately, many
applications provide "delay compensation" which is a means
for Nectar to tell the application it has delayed the signal, and
the host application should automatically "undo" the delay on
the track. If your host application supports delay com-
pensation, enable this option.If your application doesn't sup-
port Nectar 's delay compensation feature, or skips/stutters
with this option turned on, you can manually correct the delay
offset in the host application (i.e. manually edit out the short
delay of silence).
See Delay Compensation documentation for more info.
View Buffers
This launches the View Buffers dialog, which lets you inspect
the buffer sizes which your host application is using.