User Manual
Table Of Contents
- Introduction
- What’s New in Nectar 2?
- Authorization
- Quickstart
- Global Menu
- Preset Manager
- Overview Panel
- Input and Output Gain
- Input and Output Meters
- Equalizer Module
- Compressors Module
- De-Esser Module
- Gate Module
- Saturation Module
- Pitch Correction Module
- Harmony Module
- Reverb Module
- FX Module
- Delay Module
- Limiter Module
- Pitch Editor Plug-in
- Breath Control Plug-in
- Preset System
- Spectrum
- History Menu
- CPU Optimization
- Buffer Size Viewer
- Automation
- Setting up MIDI Control
- Setting up ReWire Control
- Delay Compensation
- Keyboard and Mouse Support
- Available Shortcut Keys (PC/MAC)
- Options Menu
- General Options
- Spectrum Options
- Input/Output Options
- EQ/Harmony Options
- Pitch Editor General Options
- Pitch Editor Pitch Options
- Breath Control General Options
- iZotope Customer Support
Visuals
As you adjust a band you will see two EQ curves. The bright orange curve is the
composite of all EQ bands while the darker orange curve shows the EQ curve of
the selected band.
Spectrum Overlay
A spectrum by default is overlaid on the EQ module for visual feedback of the
incoming audio. You can set options such as average or real time spectrum,
show peak spectrum, etc. These are available in the Spectrum Options screen.
On the right you'll see the gain scale for the EQ. This will change as you zoom
the EQ in or out. On the left you'll see the scale for the spectrum. On the bottom
you'll see the frequency scale which applies to both the EQ and the spectrum.
Note: The scales for the EQ and spectrum are different, by design. If they were
made to match, you wouldn't see enough of the spectrum for it to be useful.