User Manual
Table Of Contents
- Introduction
- What’s New in Nectar 2?
- Authorization
- Quickstart
- Global Menu
- Preset Manager
- Overview Panel
- Input and Output Gain
- Input and Output Meters
- Equalizer Module
- Compressors Module
- De-Esser Module
- Gate Module
- Saturation Module
- Pitch Correction Module
- Harmony Module
- Reverb Module
- FX Module
- Delay Module
- Limiter Module
- Pitch Editor Plug-in
- Breath Control Plug-in
- Preset System
- Spectrum
- History Menu
- CPU Optimization
- Buffer Size Viewer
- Automation
- Setting up MIDI Control
- Setting up ReWire Control
- Delay Compensation
- Keyboard and Mouse Support
- Available Shortcut Keys (PC/MAC)
- Options Menu
- General Options
- Spectrum Options
- Input/Output Options
- EQ/Harmony Options
- Pitch Editor General Options
- Pitch Editor Pitch Options
- Breath Control General Options
- iZotope Customer Support
Phaser
The Phaser is a phase-shifting effect that adds an additional signal through a
non-linear all pass filter creating a more subtle comb-filtering effect.
Feedback
The Feedback control determines the amount of the phased signal that is fed
back into the Phaser.
Depth
The depth slider controls the frequency range of the filters of the phaser sweep.
At lower settings, the phaser will affect low-end frequencies, and at higher set-
tings, the phaser will sweep into higher frequencies.
Flanger
The Flanger is a phase-shifting effect that adds a slightly delayed signal to cre-
ate a whooshing comb-filtering effect with frequency notches in linear harmonic
series.
Feedback
The Feedback control determines the amount of the flanged signal that is fed
back into the flanger.
Depth
The Depth control determines the amount of modulation by controlling the depth
of the Flanger’s filtering.
Chorus
The Chorus adds a delayed pitch-modulated signal to the input, producing a
shimmering effect that also widens the stereo spread.