User Manual
Table Of Contents
- Introduction
- What’s New in Nectar 2?
- Authorization
- Quickstart
- Global Menu
- Preset Manager
- Overview Panel
- Input and Output Gain
- Input and Output Meters
- Equalizer Module
- Compressors Module
- De-Esser Module
- Gate Module
- Saturation Module
- Pitch Correction Module
- Harmony Module
- Reverb Module
- FX Module
- Delay Module
- Limiter Module
- Pitch Editor Plug-in
- Breath Control Plug-in
- Preset System
- Spectrum
- History Menu
- CPU Optimization
- Buffer Size Viewer
- Automation
- Setting up MIDI Control
- Setting up ReWire Control
- Delay Compensation
- Keyboard and Mouse Support
- Available Shortcut Keys (PC/MAC)
- Options Menu
- General Options
- Spectrum Options
- Input/Output Options
- EQ/Harmony Options
- Pitch Editor General Options
- Pitch Editor Pitch Options
- Breath Control General Options
- iZotope Customer Support
Global Controls
Series/Parallel Modes
In Series Mode, the effects contained in the module will affect the audio signal
one after the other from Distort to Module to Repeat. In Parallel Mode, the
effects will affect the incoming audio independently of each other. To visualize
this, imagine that in Series Mode, the Distort effect output feeds the input of the
Modulate effects, whose output feeds the input of the Repeat effects, whose out-
put feeds the input of the Global Wet control. In Parallel Mode, imagine that the
output of each effect is on its own path, all to be summed at the input of the
Global Wet control.
Tempo
This control allows you to manually set the speed of relevant effects within the
FX module. These include the effects within the Modulate and Repeat sections.
By default, this control is set to sync to the effects every 1 bar at the specified
tempo.
Host Sync
This button enables host syncing for relevant effects within the FX module.
These include the effects within the Modulate and Repeat sections.
Speed