User Manual

Master Section
OZONE 7 | OPTIONS
98
Options
By default, the I/O meters will display the Stereo mix of your audio. However, when working with Mid/
Side processing, it is often very helpful to have a clear meter indication of the overall Mid and Side levels
individually.
When the I/O meters are in Mid/Side mode, they will no longer display your signal in terms of Stereo Left and
Right. Instead, on the left side of the meter will be the level of the entire Mid signal, and on the right will be
the overall level of the side signal. The Left and Right Gain sliders will still control the Left and right Gain of
your signal however. The Mid/Side meters will still adhere to the same Type and Scale settings defined in the
I/O options menu.
Peak Hold Time
Selects how many consecutive samples of audio must exceed digital full scale, before registering as a peak.
Choices include:
• 5
• 250
• 500
• 1,000
• 5,000
• Infinite
Integration Time
This setting lets you specify the integration time for the RMS calculation. In most RMS meters, the integration
time is set to around 300 ms.
• 10 mms
• 50 ms
• 300 ms (vu)
• 1,475 ms
• 2,650 ms
• 3,825 ms
• 5,000 ms
Readout
Selects whether the peak hold section of the meters displays the current peak status (current) or instead
displays the highest peak that has occurred in the audio file (max peak).