User Manual

Standalone Version Operation
OZONE 7 | STANDALONE VERSION OPERATION
14
Loop
To loop playback of a specific section of audio, click and drag on the mouse and highlight a portion
of the audio file; the section will highlight in blue and the “loop” icon in the transport bar will also
highlight.
When you next press Play, the transport will loop playback repeatedly for the highlighted section only.
To stop looping audio, click on the Loop button again. The button will de-illuminate and looping will no
longer be active, even though the area of the waveform will remain highlighted. The Loop button can
be manually clicked again if you wish to again loop the audio.
Ozone’s transport bar also contains three helpful displays, as follows:
Track Number
This number displays the track number of the currently selected track.
Time Counter
This counter will display the current time position within the audio file, displaying in minutes/ seconds/
milliseconds.
Total Time
This smaller display shows you the total length of all songs in the session.
To play back the imported audio file, press the space bar or click on the Play button. The audio file will
be played back, with a moving playhead indicating the current position in the file.
• Press the space bar again or click on the Stop button to stop playback.
This function is very useful when dialing in the desired processing for a particular section of your audio
file.