User Manual

Table Of Contents
Mastering Modules
OZONE 7 | MASTERING MODULES
68
Visuals
Threshold Meter
The Threshold meter uses level meters to display the gain reduction taking place. The two outer
meters display the levels of the incoming signal and the inner meters show the amount of gain
reduction taking place.
Visuals
The display at the top of the Vintage Compressor module oers two display modes:
Detection Filter
Gain Reduction Trace
To view a given display mode, click on its icon on the left side of the display.
Gain Reduction Trace
The Gain Reduction Trace is a scrolling meter that displays the waveform of the input signal with a
superimposed trace showing the amount of gain reduction taking place. The vertical scale on the left
side of the meter can be adjusted by hovering over it and using your mouse wheel to zoom or clicking
and dragging to change the range. This can help you to set attack and release controls appropriately
and to monitor the envelope of gain reduction.
Spectrum View
The Spectrum View displays the output signal in a spectrum analyzer.
Component Vintage Limiter Plug-in
If you are using Ozone 7 Advanced you will also have the ability to instantiate Ozone 7’s Vintage
Limiter module as an individual component plug-in.
Ozone 7 Advanced includes component plug-ins for all of Ozone’s modules. Each component plug-in
has the same features as its corresponding in-Ozone module.