User Manual

General Description of Hardware

1. General Description of Hardware

1.1 Screen Display Description

1. Insert the micro USB charging end into the Swami 6000 and then

insert the USB end of the charging cord into a USB charging port

or AC adapter (included). The recommended USB charging rate

is 5V, 1A. Higher charging input could shorten the battery life of

the unit.

2. A complete full charge will take roughly 6 hours of charging time.

Micro USB

The Swami 6000 has a set of strong internal magnets which holds

on the metal belt clip. The belt clip must be removed before being

able to attach to a cart frame. To remove the belt clip:

MAGNETIC BELT CLIP REMOVAL:

1. With the unit vertical, rotate the belt clip 90 degrees in

either direction.

2. Next, lift up on the top end of the clip and push down

on the other end to lift o󰀨 from the magnets.

NOTE: The internal magnets are very strong. A generous amount

of force is required to separate the clip from the magnets

To attach, simply line up the square backing of the belt clip and let the magnets attract the backing.

Lift

Push

Down