SDS

Safety Data Sheet
According to OSHA Hazard Communication Standard, 29 CFR 1910.1200
Initial preparation date: 07.26.2018 Page 4 of 9
Instant Cyanoacrylate Adhesive
Generated using Total SDS™ (patent-pending), www.GSMSDS.com
Use spark-proof tools and explosion-proof equipment
Absorb with non-combustible liquid-binding material (sand, diatomaceus earth (clay), acid binders, universal
binders)
Dispose of contents / container in accordance with local regulations
Reference to other sections:
Not determined or not applicable.
SECTION 7: Handling and storage
Precautions for safe handling:
Use only with adequate ventilation.
Avoid breathing mist or vapor.
Do not eat, drink, smoke or use personal products when handling chemical substances.
Take precautionary measures against electrostatic discharges.
Use only non-sparking tools.
Conditions for safe storage, including any incompatibilities:
Keep container tightly sealed.
Protect from freezing and physical damage.
Store in a cool, well-ventilated area.
Store away from all ignition sources (open flames, hot surfaces, direct sunlight, spark sources).
SECTION 8: Exposure controls/personal protection
Only those substances with limit values have been included below.
Occupational Exposure limit values:
Country (Legal Basis) Substance Identifier Permissible concentration
ACGIH Resin 7085-85-0 8-Hour Exposure Limit (TLV-TWA):
0.2 ppm
Resin 7085-85-0 15-minute STEL: 1 ppm
Biological limit values:
No biological exposure limits noted for the ingredient(s).
Information on monitoring procedures:
Monitoring of the concentration of substances in the breathing zone of workers or in the general workplace
may be required to confirm compliance with an OEL and adequacy of exposure controls.
Biological monitoring may also be appropriate for some substances.
Appropriate engineering controls:
Emergency eye wash fountains and safety showers should be available in the immediate vicinity of use or
handling.
Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapor and
mists below the applicable workplace exposure limits (Occupational Exposure Limits-OELs) indicated above.
Use explosion-proof ventilation equipment.
Personal protection equipment
Eye and face protection:
Safety goggles or glasses, or appropriate eye protection.
Skin and body protection:
Select glove material impermeable and resistant to the substance.
Wear appropriate clothing to prevent any possibility of skin contact.
Respiratory protection: