SDS

ManualsBrandsJ-B Weld ManualsPaint0.40 oz. Extreme Heat Adhesive Paste (Case of 6)

Generated using Total SDS™ (patent-pending), www.GSMSDS.com

Metallic Repair Paste

SECTION 1: Identiﬁcation

SECTION 2: Hazard(s) identiﬁcation

Safety Data Sheet

According to OSHA Hazard Communication Standard, 29 CFR 1910.1200

Initial preparation date:

03.27.2019

Revision date:

11.18.2019

Page 1 of 10

Product identiﬁer

Product name:

Metallic Repair Paste

Product code:

37901

Recommended use of the product and restriction on use

Relevant identiﬁed uses:

Professional & Industrial use; Muﬄer mender,

Exhaust system repair cement.

Uses advised against:

Not determined or not applicable.

Reasons why uses advised against:

Not determined or not applicable.

Manufacturer or supplier details

Manufacturer:

United States

J-B Weld Company, LLC

400 CMH Road

Sulphur Springs, TX 75482

903-885-7696

info@jbweld.com

Emergency telephone number:

United States

InfoTrac

Transportation Emergencies (24 hour): 352-323-3500

GHS classiﬁcation:

Skin irritation, category 2

Serious eye damage, category 1

Label elements

Hazard pictograms:

Signal word:

Danger

Hazard statements:

H315 Causes skin irritation.

H318 Causes serious eye damage.

Precautionary statements:

P264 Wash hands thoroughly after handling.

P280 Wear protective gloves/protective clothing/eye protection/face protection.

P321 Speciﬁc treatment (see supplemental ﬁrst aid instructions on this label).

P362 Take oﬀ contaminated clothing and wash before reuse

P302+P352 IF ON SKIN: Wash with plenty of soap and water.

P332+P313 If skin irritation occurs: Get medical advice/attention

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if

Summary of content (10 pages)

PAGE 1
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 03.27.2019 Revision date: 11.18.2019 Page 1 of 10 Metallic Repair Paste SECTION 1: Identiﬁcation Product identiﬁer Product name: Metallic Repair Paste Product code: 37901 Recommended use of the product and restriction on use Relevant identiﬁed uses: Professional & Industrial use; Muﬄer mender, Exhaust system repair cement. Uses advised against: Not determined or not applicable.
PAGE 2
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 03.27.2019 Page 2 of 10 Revision date: 11.18.2019 Metallic Repair Paste present and easy to do. Continue rinsing. P310 Immediately call a POISON CENTER or doctor/physician. P501 Dispose of contents/container in accordance with local regulations.
PAGE 3
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 03.27.2019 Page 3 of 10 Revision date: 11.18.
PAGE 4
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 03.27.2019 Page 4 of 10 Revision date: 11.18.2019 Metallic Repair Paste SECTION 7: Handling and storage Precautions for safe handling: Use only with adequate ventilation. Avoid breathing dust. Do not eat, drink, smoke or use personal products when handling chemical substances. Conditions for safe storage, including any incompatibilities: Keep container tightly sealed. Keep container dry.
PAGE 5
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 03.27.2019 Page 5 of 10 Revision date: 11.18.2019 Metallic Repair Paste If engineering controls do not maintain airborne concentrations below recommended exposure limits (where applicable) or to an acceptable level (in countries where exposure limits have not been established), an approved respirator must be worn. General hygienic measures: Avoid contact with skin, eyes and clothing.
PAGE 6
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 03.27.2019 Page 6 of 10 Revision date: 11.18.2019 Metallic Repair Paste Conditions to avoid: None known. Incompatible materials: None known. Hazardous decomposition products: None known. SECTION 11: Toxicological information Acute toxicity Assessment: Based on available data, the classiﬁcation criteria are not met. Product data: No data available.
PAGE 7
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 03.27.2019 Page 7 of 10 Revision date: 11.18.
PAGE 8
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 03.27.2019 Page 8 of 10 Revision date: 11.18.2019 Metallic Repair Paste Assessment: Based on available data, the classiﬁcation criteria are not met. Product data: No data available. Substance data: No data available. Chronic (long-term) toxicity Assessment: Based on available data, the classiﬁcation criteria are not met. Product data: No data available. Substance data: No data available.
PAGE 9
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 03.27.2019 Page 9 of 10 Revision date: 11.18.
PAGE 10
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 03.27.2019 Page 10 of 10 Revision date: 11.18.2019 Metallic Repair Paste 14808-60-7 Silica, crystalline quartz Listed California Proposition 65: WARNING: This product can expose you to Silica, crystalline quartz; which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.