SDS
Safety Data Sheet
According to OSHA Hazard Communication Standard, 29 CFR 1910.1200
Initial preparation date: 04.04.2019 Page 5 of 13
Wood Restore – Wood Filler
Generated using Total SDS™ (patent-pending), www.GSMSDS.com
Store in closed containers away strong oxidizing agents.
SECTION 8: Exposure controls/personal protection
Only those substances with limit values have been included below.
Occupational Exposure limit values:
Country (Legal Basis) Substance Identifier Permissible concentration
United States (OSHA) Talc (Non asbestos) 14807-96-6 OSHA PEL Ceiling 20 mppcf
Styrene 100-42-5 8 Hour (PEL-TWA) : 100 ppm
Titanium Dioxide 13463-67-7 OSHA PEL TWA 15 mg/m³ (Total
dust)
Glass enamel 65997-17-3 8-Hour Exposure Limit (PEL-TWA):
15 mg/m³
Glass enamel 65997-17-3 8-Hour Exposure Limit (PEL-TWA):
5 mg/m³ (respirable)
Glass enamel 65997-17-3 8-Hour Exposure Limit (PEL-TWA):
15 mg/m³ (total dust)
Glass enamel 65997-17-3 8-Hour Exposure Limit (PEL-TWA):
15 mg/m³ (fibrous glass)
Glass enamel 65997-17-3 8-Hour Exposure Limit (PEL-TWA):
15 mg/m³ (fibrous glass as total
dust)
Glass enamel 65997-17-3 8-Hour Exposure Limit (PEL-TWA):
5 mg/m³ (fibrous glass -
respirable)
Glass enamel 65997-17-3 10-Hour Exposure Limite (REL-
TWA): 3 fibers/cm³ (fibers ≤3.5
µm in diameter, ≥10 µm in
length); 5 mg/m³ (total)
Glass enamel 65997-17-3 10-Hour Exposure Limite (REL-
TWA): 15 mg/m³ (fibrous glass -
total))
Glass enamel 65997-17-3 8-Hour Exposure Limit (TLV-TWA):
5 mg/m³ (continuous filament
glass fibers as inhalable
particulate matter)
ACGIH Talc (Non asbestos) 14807-96-6 ACGIH TLV TWA 2 mg/m³;
(Inhalable particulate matter
containing no asbestos and < 1%
crystalline silica)
Styrene 100-42-5 8 hour (TLV-TWA) : 10 ppm
Titanium Dioxide 13463-67-7 ACGIH TLV TWA 10 mg/m³
Styrene 100-42-5 15-minute (STEL) : 20 ppm
Glass enamel 65997-17-3 8-Hour Exposure Limit (TLV-TWA):
1 fibers/cm³
Glass enamel 65997-17-3 8-Hour Exposure Limit (TLV-TWA):
1 fiber/cc (continuous filament
glass fibers)
Glass enamel 65997-17-3 8-Hour Exposure Limit (TLV-TWA):
5 mg/m³ (continuous filament
glass fibers as inhalable
particulate matter];
NIOSH Talc (Non asbestos) 14807-96-6 NIOSH REL TWA 2.0 mg/m³