SDS

Safety Data Sheet
According to OSHA Hazard Communication Standard, 29 CFR 1910.1200
Initial preparation date: 04.04.2019 Page 7 of 13
Wood Restore – Wood Filler
Generated using Total SDS™ (patent-pending), www.GSMSDS.com
SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
Appearance Off-white paste
Odor Mineral spirits
Odor threshold Not available
pH Not available
Melting point/freezing point Not available
Initial boiling point/range 148.8°C (300°F)
Flash point (closed cup) 40°C (104°F) PMCC
Evaporation rate > 1 Butyl Acetate = 1
Flammability (solid, gas) Flammable
Upper flammability/explosive limit 6 Vol. %
Lower flammability/explosive limit 1 Vol. %
Vapor pressure 2 mmHg
Vapor density 4.9 Air = 1
Density Not determined or not available.
Relative density 1.07 - 1.10. ASTM D-1475-98
Solubilities None.
Partition coefficient (n-octanol/water) Not determined or not available.
Auto/Self-ignition temperature Not determined or not available.
Decomposition temperature Not determined or not available.
Dynamic viscosity Not determined or not available.
Kinematic viscosity Not determined or not available.
Explosive properties Not determined or not available.
Oxidizing properties Not determined or not available.
Other information
VOC 1.46 lbs/gal or 175 g/L
SECTION 10: Stability and reactivity
Reactivity:
Does not react under normal conditions of use and storage.
Chemical stability:
Stable at normal temperatures and pressures.
Possibility of hazardous reactions:
Will not occur.
Conditions to avoid:
Heat, sparks or open flames.
Incompatible materials:
Oxidizing agents.
Hazardous decomposition products:
Oxides of carbon and other potentially toxic fumes.
SECTION 11: Toxicological information