SDS
Safety Data Sheet
According to OSHA Hazard Communication Standard, 29 CFR 1910.1200
Initial preparation date: 05.21.2019 Page 6 of 11
Wood Restore Repair Putty Hardener
Generated using Total SDS™ (patent-pending), www.GSMSDS.com
Relative density Not determined or not available.
Solubilities Insoluble in water
Partition coefficient (n-octanol/water) Not determined or not available.
Auto/Self-ignition temperature Not determined or not available.
Decomposition temperature SADT = 50 °C. The SADT (self-accelerating decomposition
temperature) is an experimentally determined temperature at
which the product, in its conventional packaging will decompose in
a self accelerating reaction.
Dynamic viscosity Not determined or not available.
Kinematic viscosity Not determined or not available.
Explosive properties Product does not present an explosion hazard
Oxidizing properties Not determined or not available.
Other information
SECTION 10: Stability and reactivity
Reactivity:
Does not react under normal conditions of use and storage.
Chemical stability:
No decomposition if used and stored according to specifications.
Exothermic thermal decomposition.
Visible decomposition with spontaneous ignition on heating.
SADT = 50 °C SADT (Self accelerating decomposition temperature) is the lowest temperature at which self
accelerating decomposition may occur with a substance in the packaging as used in transport. A dangerous
self-accelerating decomposition reaction and, under certain circumstances, explosion or fire can be caused
by thermal decomposition at and above the SADT. Contact with incompatible substances can cause
decomposition at or below the SADT
Possibility of hazardous reactions:
Reacts with reducing agents, heavy metals, alkali, amines and strong acids.
Conditions to avoid:
None known.
Incompatible materials:
Reducing agents like amines, acids, alkali, compounds based on heavy metals (p.e. accelerators).
Hazardous decomposition products:
Benzoic acid, Benzene, Biphenyl Phenyl benzoate
SECTION 11: Toxicological information
Acute toxicity
Assessment: Based on available data, the classification criteria are not met.
Product data: No data available.
Substance data:
Name Route Result
Benzoyl peroxide oral LD50 Oral - Rat - 77100 mg/kg
Ethane-1,2-diol oral LD50 - Cat - 1,650 mg/kg
Skin corrosion/irritation
Assessment: Based on available data, the classification criteria are not met.
Product data: