SDS

P261
Avoid breathing mist/vapours/spray.
P280
Wear protective gloves, protective clothing, eye protection and face protection.
P264
Wash all exposed external body areas thoroughly after handling.
P272
Contaminated work clothing must not be allowed out of the workplace.
Precautionary statement(s) Response
P305+P351+P338
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P312
Call a POISON CENTER/doctor/physician/first aider/if you feel unwell.
P333+P313
If skin irritation or rash occurs: Get medical advice/attention.
P337+P313
If eye irritation persists: Get medical advice/attention.
P302+P352
IF ON SKIN: Wash with plenty of water and soap.
P304+P340
IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P332+P313
If skin irritation occurs: Get medical advice/attention.
P362+P364
Take off contaminated clothing and wash it before reuse.
Precautionary statement(s) Storage
P405
Store locked up.
P403+P233
Store in a well-ventilated place. Keep container tightly closed.
Precautionary statement(s) Disposal
P501
Dispose of contents/container to authorised hazardous or special waste collection point in accordance with any local regulation.
SECTION 3 Composition / information on ingredients
Substances
See section below for composition of Mixtures
Mixtures
CAS No
%[weight]
Name
25068-38-6*
96
3101-60-8*
4
SECTION 4 First-aid measures
Description of first aid measures
Eye Contact
If this product comes in contact with the eyes:
Wash out immediately with fresh running water.
Ensure complete irrigation of the eye by keeping eyelids apart and away from eye and moving the eyelids by occasionally lifting the upper
and lower lids.
Seek medical attention without delay; if pain persists or recurs seek medical attention.
Removal of contact lenses after an eye injury should only be undertaken by skilled personnel.
Skin Contact
If skin contact occurs:
Immediately remove all contaminated clothing, including footwear.
Flush skin and hair with running water (and soap if available).
Seek medical attention in event of irritation.
Inhalation
If fumes or combustion products are inhaled remove from contaminated area.
Lay patient down. Keep warm and rested.
Prostheses such as false teeth, which may block airway, should be removed, where possible, prior to initiating first aid procedures.
Apply artificial respiration if not breathing, preferably with a demand valve resuscitator, bag-valve mask device, or pocket mask as trained.
Perform CPR if necessary.
Transport to hospital, or doctor, without delay.
Ingestion
Immediately give a glass of water.
First aid is not generally required. If in doubt, contact a Poisons Information Centre or a doctor.
Most important symptoms and effects, both acute and delayed
See Section 11
Indication of any immediate medical attention and special treatment needed
Treat symptomatically.
SECTION 5 Fire-fighting measures
Extinguishing media
There is no restriction on the type of extinguisher which may be used.
Use extinguishing media suitable for surrounding area.
bisphenol A diglycidyl ether polymer
4-tert-butylphenyl glycidyl ether
Version No:
1.1
Page
2
of
8
ClearWeld Part A, Resin
Issue Date:
10/07/2022
Print Date:
10/07/2022
Continued...