SDS

Special hazards arising from the substrate or mixture
Fire Incompatibility
None known.
Special protective equipment and precautions for fire-fighters
Fire Fighting
Alert Fire Brigade and tell them location and nature of hazard.
Wear breathing apparatus plus protective gloves in the event of a fire.
Fire/Explosion Hazard
Non combustible.
Not considered a significant fire risk, however containers may burn.
May emit poisonous fumes.
May emit corrosive fumes.
SECTION 6 Accidental release measures
Personal precautions, protective equipment and emergency procedures
See section 8
Environmental precautions
See section 12
Methods and material for containment and cleaning up
Minor Spills
Clean up all spills immediately.
Avoid contact with skin and eyes.
Major Spills
Minor hazard.
Clear area of personnel.
Personal Protective Equipment advice is contained in Section 8 of the SDS.
SECTION 7 Handling and storage
Precautions for safe handling
Safe handling
Avoid all personal contact, including inhalation.
Wear protective clothing when risk of exposure occurs.
Other information
Store in original containers.
Keep containers securely sealed.
Conditions for safe storage, including any incompatibilities
Suitable container
Polyethylene or polypropylene container.
Packing as recommended by manufacturer.
Storage incompatibility
None known
SECTION 8 Exposure controls / personal protection
Control parameters
Occupational Exposure Limits (OEL)
INGREDIENT DATA
Source
Ingredient
Material name
TWA
STEL
Peak
Notes
US OSHA Permissible Exposure
Limits (PELs) Table Z-1
bisphenol A diglycidyl
ether polymer
Particulates Not Otherwise Regulated
(PNOR)- Total dust
15 mg/m3
Not
Available
Not
Available
Not Available
US OSHA Permissible Exposure
Limits (PELs) Table Z-1
bisphenol A diglycidyl
ether polymer
Particulates Not Otherwise Regulated
(PNOR)- Respirable fraction
5 mg/m3
Not
Available
Not
Available
Not Available
US OSHA Permissible Exposure
Limits (PELs) Table Z-3
bisphenol A diglycidyl
ether polymer
Inert or Nuisance Dust: Respirable fraction
5 mg/m3 / 15
mppcf
Not
Available
Not
Available
Not Available
US OSHA Permissible Exposure
Limits (PELs) Table Z-3
bisphenol A diglycidyl
ether polymer
Inert or Nuisance Dust: Total Dust
15 mg/m3 / 50
mppcf
Not
Available
Not
Available
Not Available
US NIOSH Recommended
Exposure Limits (RELs)
bisphenol A diglycidyl
ether polymer
Particulates not otherwise regulated
Not Available
Not
Available
Not
Available
See
Appendix D
Emergency Limits
Ingredient
TEEL-1
TEEL-2
TEEL-3
bisphenol A diglycidyl ether
polymer
90 mg/m3
990 mg/m3
5,900 mg/m3
Ingredient
Original IDLH
Revised IDLH
bisphenol A diglycidyl ether
Not Available
Not Available
Version No:
1.1
Page
3
of
8
ClearWeld Part A, Resin
Issue Date:
10/07/2022
Print Date:
10/07/2022
Continued...