SDS

Clear Epoxy Hardener - Syringe - Part B Revision Date 17-Oct-2014
_____________________________________________________________________________________________
_____________________________________________________________________________________________
Page 5 / 12
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Personal Precautions
Attention! Corrosive material. Avoid contact with skin, eyes or clothing. Ensure adequate
ventilation. Use personal protective equipment as required. Evacuate personnel to safe
areas. Keep people away from and upwind of spill/leak. Avoid breathing vapors or mists.
Avoid generation of dust.
Other Information
Environmental Precautions
Refer to protective measures listed in Sections 7 and 8.
Environmental Precautions
Refer to protective measures listed in Sections 7 and 8. Prevent further leakage or
spillage if safe to do so. Should not be released into the environment. Do not allow to
enter into soil/subsoil. Prevent product from entering drains.
Methods and material for containment and cleaning up
Methods for Containment
Prevent further leakage or spillage if safe to do so.
Methods for cleaning up
Soak up with inert absorbent material. Pick up and transfer to properly labeled containers.
7. HANDLING AND STORAGE
Precautions for safe handling
Handling
Handle in accordance with good industrial hygiene and safety practice. Avoid contact
with skin, eyes or clothing. Avoid breathing vapors or mists. Use only with adequate
ventilation and in closed systems. In case of insufficient ventilation, wear suitable
respiratory equipment. Do not eat, drink or smoke when using this product. Take off
contaminated clothing and wash before reuse.
Conditions for safe storage, including any incompatibilities
Storage Keep containers tightly closed in a dry, cool and well-ventilated place. Protect from
moisture. Store locked up. Keep out of the reach of children. Store away from other
materials.
Incompatible Products Acids. Bases. Oxidizing agent.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Exposure Guidelines
Chemical Name
ACGIH TLV
OSHA PEL
NIOSH IDLH
Ethylbenzene 100-41-4
TWA: 20 ppm
TWA: 100 ppm
TWA: 435 mg/m
3
(vacated) TWA: 100 ppm
(vacated) TWA: 435 mg/m
3
(vacated) STEL: 125 ppm
(vacated) STEL: 545 mg/m
3
IDLH: 800 ppm
TWA: 100 ppm
TWA: 435 mg/m
3
STEL:
125 ppm
STEL: 545 mg/m
3
Other Exposure Guidelines See section 15 for national exposure control parameters
Appropriate engineering controls
Engineering Measures Showers
Eyewash stations