SDS

Page: 6
SAFETY DATA SHEET
Revision Date: 05/26/2015
Print Date: 1/13/2016
SDS Number: R0279263
Pliogrip™ 7400 ADHESIVE
™ Trademark, Ashland or its subsidiaries, registered
in various countries
148949
Version: 1.1
6 / 20
emergency procedures
Persons not wearing protective equipment should be excluded
from area of spill until clean-up has been completed.
Environmental precautions
:
Prevent product from entering drains.
Prevent further leakage or spillage if safe to do so.
If the product contaminates rivers and lakes or drains inform
respective authorities.
Methods and materials for
containment and cleaning up
:
Soak up with inert absorbent material (e.g. sand, silica gel,
acid binder, universal binder, sawdust).
Keep in suitable, closed containers for disposal.
Other information
:
Comply with all applicable federal, state, and local regulations.
SECTION 7. HANDLING AND STORAGE
Advice on safe handling
:
Avoid formation of aerosol.
Provide sufficient air exchange and/or exhaust in work rooms.
Do not breathe vapours/dust.
Do not smoke.
Persons susceptible to skin sensitisation problems or asthma,
allergies, chronic or recurrent respiratory disease should not
be employed in any process in which this mixture is being
used.
Container hazardous when empty.
Avoid exposure - obtain special instructions before use.
Avoid contact with skin and eyes.
Smoking, eating and drinking should be prohibited in the
application area.
For personal protection see section 8.
Dispose of rinse water in accordance with local and national
regulations.
Conditions for safe storage
:
Keep container tightly closed in a dry and well-ventilated
place.
Observe label precautions.
Electrical installations / working materials must comply with
the technological safety standards.
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Components with workplace control parameters
Components
CAS-No.
Value type
(Form of
exposure)
Control
parameters /
Permissible
concentration
Basis
SCAVENGER
254504001-
TWA
1 mg/m3
ACGIH