Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 02.27.2019 J-B Weld Plastic Bonder – Part A SECTION 1: Identification Product identifier Product name: J-B Weld Plastic Bonder – Part A Product code: 7400 Recommended use of the product and restriction on use Relevant identified uses: Adhesives Uses advised against: Not determined or not applicable. Reasons why uses advised against: Not determined or not applicable.
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 02.27.2019 Page 2 of 13 J-B Weld Plastic Bonder – Part A H335 May cause respiratory irritation. H373 May cause damage to respiratory system through prolonged or repeated exposure by inhalation. Precautionary statements: P264 Wash hands thoroughly after handling. P280 Wear protective gloves/protective clothing/eye protection/face protection. P261 Avoid breathing dust/fume/gas/mist/vapors/spray.
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 02.27.2019 Page 3 of 13 J-B Weld Plastic Bonder – Part A Additional Information: The specific chemical identity and/or exact percentage (concentration) of composition has been withheld as a trade secret in accordance with paragraph (i) of the OSHA Hazard Communication Standard (29 CFR §1910.1200).
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 02.27.
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 02.27.2019 Page 5 of 13 J-B Weld Plastic Bonder – Part A Country (Legal Basis) Substance Identifier Permissible concentration United States (OSHA) Talc 14807-96-6 OSHA PEL Ceiling 20 mppcf Silane, dichlorodimethyl-, reaction products with silica 68611-44-9 8-Hour TWA: 0.8 mg/m³ 4,4'-Methylenediphenyl diisocyanate 101-68-8 TWA: 0.02 ppm (0.
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 02.27.2019 Page 6 of 13 J-B Weld Plastic Bonder – Part A Melting point/freezing point Not determined or not available. Initial boiling point/range >392°F (>200°C) Flash point (closed cup) >100°C Evaporation rate <1 (n-Butyl Acetate = 1) Flammability (solid, gas) Not determined or not available. Upper flammability/explosive limit Not determined or not available.
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 02.27.2019 Page 7 of 13 J-B Weld Plastic Bonder – Part A Name Route Result 4,4'-Methylenediphenyl diisocyanate inhalation LC50 - Rat - 369 mg/cu m/4 h 4,4'-Methylenediphenyl diisocyanate, oligomers inhalation LC50 - Rat: 0.
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 02.27.2019 Page 8 of 13 J-B Weld Plastic Bonder – Part A Name Result Polypropylene glycol trimethylolpropane triether, 4,4'-diphenylmethane diisocyanate polymer May cause an allergic skin reaction. 4,4'-Methylenediphenyl diisocyanate May cause sensitization by inhalation and skin contact. 4,4'-Methylenediphenyl diisocyanate, oligomers May cause an allergic skin reaction.
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 02.27.2019 Page 9 of 13 J-B Weld Plastic Bonder – Part A Specific target organ toxicity (repeated exposure) Assessment: May cause damage to organs through prolonged or repeated exposure Product data: No data available.
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 02.27.2019 Page 10 of 13 J-B Weld Plastic Bonder – Part A Mobility in soil Product data: No data available. Substance data: No data available. Other adverse effects: No data available.
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 02.27.
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 02.27.
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 02.27.2019 Page 13 of 13 J-B Weld Plastic Bonder – Part A California Proposition 65: WARNING: This product can expose you to Talc (Mg3H2(SiO3)4), which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 02.11.2019 J-B Weld Plastic Bonder Black - Part B SECTION 1: Identification Product identifier Product name: J-B Weld Plastic Bonder Black - Part B Product code: 50139 Recommended use of the product and restriction on use Relevant identified uses: Adhesive Uses advised against: Not determined or not applicable. Reasons why uses advised against: Not determined or not applicable.
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 02.11.2019 Page 2 of 12 J-B Weld Plastic Bonder Black - Part B Identification Name Weight % CAS number: 14807-96-6 Talc 25-30 CAS number: 1333-86-4 Carbon Black 0.1-1 CAS number: 110-85-0 Piperazine 0.1-0.5 CAS number: 1318-02-1 Zeolite 0.5-1.5 CAS number: 280-57-9 1,4-Diazabicyclooctane 0.1-0.5 CAS number: 25791-96-2 Glycerol, propoxylated 0.
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 02.11.2019 Page 3 of 12 J-B Weld Plastic Bonder Black - Part B Rinse mouth thoroughly Seek medical attention if irritation, discomfort, or vomiting persists Most important symptoms and effects, both acute and delayed Acute symptoms and effects: Not determined or not applicable. Delayed symptoms and effects: Not determined or not applicable.
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 02.11.2019 Page 4 of 12 J-B Weld Plastic Bonder Black - Part B SECTION 7: Handling and storage Precautions for safe handling: Use only with adequate ventilation. Avoid breathing mist or vapor. Do not eat, drink, smoke or use personal products when handling chemical substances. Conditions for safe storage, including any incompatibilities: Keep container tightly sealed.
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 02.11.2019 Page 5 of 12 J-B Weld Plastic Bonder Black - Part B Safety goggles or glasses, or appropriate eye protection. Skin and body protection: Select glove material impermeable and resistant to the substance. Wear appropriate clothing to prevent any possibility of skin contact.
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 02.11.2019 Page 6 of 12 J-B Weld Plastic Bonder Black - Part B Stable under recommended storage conditions. Possibility of hazardous reactions: Product will not undergo hazardous polymerization. Conditions to avoid: Heat. Exposure to moisture. Incompatible materials: Alkalis, isocyanates, oxidizers, Phosphorus compounds, strong acids, strong oxidizing agents.
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 02.11.2019 Page 7 of 12 J-B Weld Plastic Bonder Black - Part B Product data: No data available. Substance data: Name Species Result Carbon Black Not applicable. The carcinogenic classification only applies to airborne, unbound particles of respirable size.
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 02.11.2019 Page 8 of 12 J-B Weld Plastic Bonder Black - Part B SECTION 12: Ecological information Acute (short-term) toxicity Assessment: Based on available data, the classification criteria are not met. Product data: No data available. Substance data: No data available. Chronic (long-term) toxicity Assessment: Based on available data, the classification criteria are not met.
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 02.11.
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 02.11.
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 02.11.
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 02.11.2019 Page 12 of 12 J-B Weld Plastic Bonder Black - Part B considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials, unless specified in the text. The responsibility to provide a safe workplace remains with the user. NFPA: 0-1-0 Initial preparation date: 02.