SDS

Safety Data Sheet
According to OSHA Hazard Communication Standard, 29 CFR 1910.1200
Initial preparation date: 02.27.2019 Page 6 of 13
J-B Weld Plastic Bonder – Part A
Generated using Total SDS™ (patent-pending), www.GSMSDS.com
Melting point/freezing point Not determined or not available.
Initial boiling point/range >392°F (>200°C)
Flash point (closed cup) >100°C
Evaporation rate <1 (n-Butyl Acetate = 1)
Flammability (solid, gas) Not determined or not available.
Upper flammability/explosive limit Not determined or not available.
Lower flammability/explosive limit Not determined or not available.
Vapor pressure <0.01333 hPa (25°C)
Vapor density Not determined or not available.
Density 1.288 g/cm³ (20°C)
Relative density Not determined or not available.
Solubilities Practically insoluble in water.
Partition coefficient (n-octanol/water) Not determined or not available.
Auto/Self-ignition temperature Not determined or not available.
Decomposition temperature Not determined or not available.
Dynamic viscosity ca. 20,000 mPa.s
Kinematic viscosity Not determined or not available.
Explosive properties Not determined or not available.
Oxidizing properties Not determined or not available.
Other information
Relative vapor density >1 (Air = 1)
SECTION 10: Stability and reactivity
Reactivity:
Does not react under normal conditions of use and storage.
Chemical stability:
Stable under normal conditions of use and storage.
Possibility of hazardous reactions:
None under normal conditions of use and storage.
Conditions to avoid:
Freezing temperatures and exposure to moisture.
Incompatible materials:
Acids, alcohols, Aluminum, Amines, Ammonia, Bases, Copper alloys, Fluorides, Iron, Oxidizing agents, strong
alkalies, strong reducing agents, Water, Zinc, Humid air.
Hazardous decomposition products:
Carbon monoxide, Carbon Dioxide (CO2), Nitrogen oxides (NOx), Acetone, Hydrocarbons.
SECTION 11: Toxicological information
Acute toxicity
Assessment:
Harmful if inhaled
Product data: No data available.
Substance data: