MSDS
1184168 - Epoxy Putty - Steel Revision Date 15-Oct-2014
_____________________________________________________________________________________________
_____________________________________________________________________________________________
Page 5 / 13
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
For non-emergency personnel No action shall be taken involving any personal risk or without suitable training. Evacuate
surrounding areas. Keep unnecessary and unprotected personnel from entering. Do not
touch or walk through spilled material. Provide adequate ventilation. Wear appropriate
respirator when ventilation is inadequate. Put on appropriate personal protective
equipment.
For emergency responders If specialized clothing is required to deal with the spillage, take note of any information in
Section 8 on suitable and unsuitable materials. See also the information in “For non-
emergency personnel”.
Environmental Precautions Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and
sewers. Inform the relevant authorities if the product has caused environmental pollution
(sewers, waterways, soil or air).
Methods and material for containment and cleaning up
Small Spill Move containers from spill area. Avoid dust generation. Using a vacuum with HEPA filter
will reduce dust dispersal. Place spilled material in a designated, labeled waste container.
Dispose of via a licensed waste disposal contractor.
Large Spill Move containers from spill area. Approach release from upwind. Prevent entry into sewers,
water courses, basements or confined areas. Avoid dust generation. Do not dry sweet.
Vacuum dust with equipment fitted with a HEPA filter and place in a closed, labeled waste
container. Dispose of via a licensed waste disposal contractor. Note: see Section 1 for
emergency contact information and Section 13 for waste disposal.
7. HANDLING AND STORAGE
Conditions for safe storage,
including any incompatibilities
Do not store above the following temperature: 35°C (95°F). Store in accordance with
local regulations. Store in original container protected from direct sunlight in a dry, cool
and well-ventilated area, away from incompatible materials (see Section 10) and food
and drink. Keep container tightly closed and sealed until ready for use. Containers that
have been opened must be carefully resealed and kept upright to prevent leakage. Do
not store in unlabeled containers. Use appropriate containment to avoid environmental
contamination.
Precautions for safe handling
Protective measure
Put on appropriate personal protective equipment (see Section 8). Persons with a
history of skin sensitization problems should not be employed in any process in which
this product is used. Do not get in eyes or on skin or clothing. Do not ingest. Keep in
the original container or an approved alternative made from a compatible material, kept
tightly closed when not in use. Empty containers retain product residue and can be
hazardous. Do not reuse container.
Advice on general occupational
hygiene
Eating, drinking and smoking should be prohibited in areas where this material is
handled, stored and processed. Workers should wash hands and face before eating,
drinking and smoking. Remove contaminated clothing and protective equipment before
entering eating areas. See also Section 8 for additional information on hygiene
measure.