SDS

_____________________________________________________________________________________________
Page 6 / 11
Skin protection
Hand protection
Chemical-resistant, impervious gloves complying with an approved standard should be
worn at all times when handling chemical products if a risk assessment indicates this is
necessary. Considering the parameters specified by the glove manufacturer, check during
use that the gloves are still retaining their protective properties. It should be noted that the
time to breakthrough for any glove material may be different for different glove
manufacturers. In the case of mixtures, consisting of several substances, the protection
time of the gloves cannot be accurately estimated.
Body protection
Personal protective equipment for the body should be selected based on the task being
performed and the risks involved and should be approved by a specialist before handling
this product.
Other skin protection
Appropriate footwear and any additional skin protection measures should be selected
based on the task being performed and the risks involved and should be approved by a
specialist before handling this product.
Eye/face protection
Safety eyewear complying with an approved standard should be used when a risk
assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases,
or dusts. If contact is possible, the following protection should be worn, unless the
assessment indicates a higher degree of protection: safety glasses with side-shields.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical state
Color
Odor
Odor threshold
pH
Melting point
Boiling point
Flash point
Evaporation rate
Liquid.
White.
Amine-like.
Not available.
Not available.
Not available.
Not available.
Closed cup: >93.3°C (>199.9°F) [Setaflash.] [Product does not sustain combustion.]
Not available.
Flammability (solid, gas)
Lower and upper explosive
(flammable) limits
Vapor pressure
Vapor density
Relative density
Solubility
Solubility in water
Auto-ignition temperature
Decomposition temperature
Viscosity
VOC (% content)
Flammable in the presence of the following materials or conditions: open flames, sparks
and static discharge.
Not available.
Not available.
Not available.
1.955
Not available.
Not available.
Not available.
>220°C (>392°F)
Not available.
<1%
10. STABILITY AND REACTIVITY
Reactivity
No specific test data related to reactivity available for this product or its ingredients.
Chemical stability
The product is stable.