User's Manual

BLUEBEE - Wireless Internet Sharing Wizard
- 11 -
2.2.2. If you have Dial-up Modem (if you have high speed Internet, refer to 2.2.1)
Before installing EasyGate, run PAN by double clicking PAN icon on the Desktop.
The PC on which you are installing EasyGate needs to be connected to Internet before you install
EasyGate. Therefore connect to Internet using Dial-Up Networking before you install EasyGate.
(If you are using customized dial-up Internet program, you may not be able to use EasyGate.
Please refer to Chapter 6. Troubleshooting for more details.)
Assuming D:\ is the CD-ROM Drive,
§ Double click D:\ EasyGate\ Setup.exe to run installation program.
2.2.2.1. Choosing network adapter
§ After EasyGate Finish checking IP address for using, choose Dial-Up Adapter as a
network adapter, and then click Configuration button.
Figure 2-13: Choosing Network Adapter
§ Reboot your computer to complete the installation process.
Figure 2-14: Installation Complete