User's Manual

BLUEBEE - Wireless Internet Sharing Wizard
- 9 -
2.2. Installing EasyGate
After completing PAN installation, install EasyGate on the Server.
EasyGate is an Internet sharing program, which enables the Clients to share the Internet
connection through the Server.
If your Internet connection is LAN, ADSL, or Cable Modem, then refer to section 2.2.1 to install
EasyGate. If your Internet connection is a dial-up modem, refer to section 2.2.2 to install EasyGate.
2.2.1. If you have LAN, ADSL, or Cable Modem
Before installing EasyGate, run PAN by double clicking PAN icon on the Desktop.
The PC on which you are installing EasyGate needs to be connected to Internet before you install
EasyGate.
Assuming D:\ is the CD-ROM Drive,
§ Double click “D:\ EasyGate\ Setup.exe” to run installation program.
2.2.1.1. Choosing network adapter
§ After EasyGate ‘Finish checking IP address for using’, choose network adapter that is
connected to the Internet, and then click “Configuration” button.
§ In Windows98SE / ME, the name of network adapter is usually the manufacture’s model
name. In Windows 2000 / XP, the name of network adapter can be found under “Network
Environment” properties.
Figure 2-9: Choosing Network Adapter
§ Reboot your computer to complete the installation process.
Figure 2-10: Installation Complete