User's Manual

Pairing the Headset with BA G- 2000
Before you start using the Headset for the first time, you must pair the Headset with
the BA G- 2000.
- Before you start pairing, you must reset the Headset. A nd then Headset will go to
pairing mode.
1. Press the three keys, V olume Up, Down and T alk button simultaneously with
the Headset turned on.
T o ensure, press the keys(Up, Down and T alk button) in 2 or three times.
Up
Down
ON/OF F
T alk
2. Wait until hear a short melody tone and then turn the Headset off .
- T o pair the Headset(BH- 1000)t with a
Bluetooth A udio- gateway(BAG- 2000)
1. With a BA G- 2000 turned on, press and hold the rest button for up to 2 or
3seconds.
Indicator
ON/OF F
Reset Button
2. T urn a BA G- 2000 off and turn it on.
3. A t this time, turn the Headset on again and will be disappeared the indicator
light flash on BAG- 2000 if the pairing has been completed in successful.
Make sure the Headset and a BA G- 2000 are not too far apart.
4. T urn the BAG- 2000 and Headset off and turn on, at this time you can hear
short melody from Headset .
5. A ttach a BA G- 2000 to the handset.