Product Manual

ManualsBrandsJ&D Mfg. ManualsExhaust FansJ & D Mfg. Storm Torque Exhaust Fan — 61in., 2847 CFM, 2 HP, 115/208-230 Volt

Total System Solutions

Due to our continual effort to provide the best products available and adhere to market conditions; literature, products, prices and availability are subject to change without notice.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer

and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product.

Storm

55˝ Fiberglass Exhaust Fan

Features

• Rugged aerodynamic straight or slant fiberglass housing with

heavy-duty deep poly cone for superior performance

• High-efficiency, totally enclosed 1 HP, 1½ HP or 2 HP motor

• Heavy gauge galvanized angled H-frame or stainless steel

angled H-frame with stainless steel hardware available

• Poly or aluminum shutters

• Automotive style belt tensioner

• UV-resistant gel coating on outside of housing

• Drainage holes in housing to prevent water and ice buildup

• Heavy gauge guard is hot dip galvanized after welding

• Lifetime Warranty on high-performance cast aluminum

props, One Year Warranty on galvanized props

• Custom pre-lubricated shaft bearings featuring an eccentric

locking collar with set screw. Bearings are permanently sealed

and rubber mounted for smooth operation, and are covered by

a Three Year Warranty

• 20 Year Warranty on fiberglass housing and poly cone

• Requires 1/3 fewer fans compared to using 48” exhaust fans

Shown: VSA55A3C23

Now

available

in black!

Black Storm

(requires extended lead time)

Summary of content (2 pages)

PAGE 1
Total System Solutions Storm 55˝ Fiberglass Exhaust Fan Now availa b in bla le ck! Shown: VSA55A3C23 Features • Rugged aerodynamic straight or slant fiberglass housing with heavy-duty deep poly cone for superior performance • High-efficiency, totally enclosed 1 HP, 1½ HP or 2 HP motor • Heavy gauge galvanized angled H-frame or stainless steel angled H-frame with stainless steel hardware available • Poly or aluminum shutters • Automotive style belt tensioner • UV-resistant gel coating on outside of hous
PAGE 2
Storm 55˝ Fiberglass Exhaust Fan @ 0.10” SP CFM/ Sz Ph Spd CFM Watt Drive Prop Part # _________________________________________________ Standard Galvanized Frame & Hardware _________________________________________________ Single Phase _________________________________________________ Aluminum Shutter _________________________________________________ VSA55G3C11E 55” 1 1 21,189 23.4 Belt 3-Glv _________________________________________________ VSA55A3C151 55” 1 1 24,056 19.