Installation Guide

Power Lift Chair
Assembly
Instruction
How to remove the chair ?
1.Pull out the ears from the back
2.Pull up the buckles firstly while take the backrest out from the base.
3.Then pull out the arms from the base.
Please note that you need to take apart the backrest before.
Q1: Missing parts when received.
A: If you find some parts are missing from the box, please kindly send us
messages to let us know the name of missing part regarding to the first page of
instructions. We will send replacement to you asap.
Q2: Some parts damaged when arrived.
A: Please send clear photos about damaged part to us as attachment, we will
check and offer you best solution soon.
Q3:
The chair is stuck on lifting or reclining position, and no response when you
press the lifting or reclining button.
A: Please kindly check if the power cord (F) are connected well with lift
motor. Sometimes the power cord (F) may fall off from the motor.
If the connection is good, then check the lift motor if it has some anomaly,
like some noise comes out when you press the lift button. If you can make
sure the motor is defective, please contact us for replacement.
FAQ
STEP 1
Insert chair back to the chair base, make sure the on
the back fully assembled to the bottom part.
G
Chair base Backrest
Armrest x2
Power cord
Remote control
Power Source
Lift control
J
Supporting Feet x4
Please make sure you’ve got everyting lists as following before assembly.
A
B C
H
E
F
STEP 3
STEP 4
STEP 2
HOME
D Ear x2
I
2 in 1 line
A
A
Insert Armrests (C) to the chair base(A),make sure the slots on the armrests fully assemled
to the bottom part.
Find a small bag in the accessories box. Take out Supporting Feets from the small bag.
Assemble the four Supporting Feet as shown on the bottom of mechanism。
Insert ears(D) to the back(B),make suer the slots on the ears fully assembled to the backrest.
Insert Chair Back(B) to the Chair Base(A),make suer the slots on the back fully assembled to the bottom part.