Installation Guide

Installation 126-1

To avoid scratches and swallowing parts，please do not install by children!

Hardware List

Seat

Seat cover

Backrest/Armrest

cover

Back cushion

Legs

Support rods

M8x50mm screw

Secure the legs

of the sofa.

Put on the seat cover.

Be careful to loosen the zipper first, and close the zipper after the sofa cover is properly put on.The

zipper end of the slipcover corresponds to the magic-cloth end of the seat cushion.

PAGE 1
Installation 126-1 To avoid scratches and swallowing parts，please do not install by children! Hardware List Seat Backrest/Armrest Back cushion Support rods Hardware List 1 2 1 4 Seat cover Backrest/Armrest cover Legs M8x50mm screw 1 2 4 8 1 Secure the legs of the sofa. 2 Put on the seat cover. Be careful to loosen the zipper first, and close the zipper after the sofa cover is properly put on.The zipper end of the slipcover corresponds to the magic-cloth end of the seat cushion.
PAGE 2
3 Put on the backrest/Armrest cover. 4 Install the support rod according to the reserved screw holes as shown. or 5 Note that the zipped side of the armrest faces the backrest.
PAGE 3
Installation 126-3 To avoid scratches and swallowing parts，please do not install by children! Hardware List Seat Legs Hardware List 1 Seat cover 4 1 Secure the legs of the sofa. 2 Put on the seat cover. Be careful to loosen the zipper first, and close the zipper after the sofa cover is properly put on.