Use and Care Manual
1 | P a g e
WARRANTY DOCUMENT
( Valid only with a proof of purchase)
Dear Customers!
We want to congratulate you on the purchase of your new furniture and we wish you many years of satisfying
use.
We cherish traditional craft production of the furniture but we combine it with modern technology. Therefore
the furniture you bought has the highest standard of quality and meet global requirements of ergonomics and
safety.
For production we use carefully selected materials and components that come from reliable sources and from
well-known European suppliers. Our furniture is made mostly of natural materials: wood, veneer, lacobel.
These materials are characterized by individuality and uniqueness. Their natural features can cause some
differences in the structure and colour of individual elements of the furniture and between different pieces.
These unique features of each piece of furniture reflect its natural beauty and timeless value.
A. GENERAL INSTRUCTIONS FOR USE AND MAINTENANCE OF THE FURNITURE
For the proper functioning and extending the life of your furniture, the following instructions for use should
be observed:
1. Furniture should be used in accordance with its construction and its intended purpose.
2. Furniture should be set up on the levelled surface. In case of furniture that are used to sit and lie on, to keep
its stability, the legs should always touch the surface. The furniture should not be used for swinging or leaning
out. Furniture should not be burdened by sitting or standing (cabinets, chest of drawers, dressing tables) or
jumping or standing (tables, furniture used for sitting and lying).
3. Furniture should not be situated close (less than 1m) to active sources of heat such as radiators, cookers and
stoves.
4. Furniture should be used indoors and protected against negative impact of weather conditions. It is
recommended to provide the following conditions:
a) air temperature range from 10 to 30ºC
b) relative humidity range from 40 to 70% (too dry air can lead to deformation of solid wooden elements, it
should be avoided to set up furniture on the wet surface: wet floors, rugs – wood used in furniture may absorb
water.
5. Furniture should not be exposed to direct sunlight (it may change the colour of wood, fabrics and leather,
varnish coats may be damaged).
6. Furniture should be protected against mechanical damage. Sharp objects of hard and coarse surface, hard
seams or rivets on trousers, pets' claws etc. may permanently damage the furniture surface.
7. Assembly of the furniture, number of elements and accessories are described in detail in the assembly
instructions for each type of the furniture. It should be checked in the instructions if the particular piece of
furniture should be fixed to the wall to keep its stability.
8. Heavy and burdened furniture on legs should not be moved directly on the surface (e.g. body and cabinet
furniture, beds, sofas) – it may lead to the leg damage or scratched flooring. If there is a need to move the
furniture, it should be emptied first and then moved carefully.
9. In case of extendable tables and TV tables, the colour of the covered part may change during use due to the
impact of UV radiation.
10. Bolts and screws in furniture connections should be tightened periodically.
11. Beware of sharp edges of the furniture. Therefore it is highly recommended to use it with caution.
12. Furniture consists of glass elements – mirrors, glass should be used carefully – it should not be hit against
or burdened excessively.
13. In case of the furniture not described in this card of materials or any doubts when it comes to the assembly
or maintenance of the purchased furniture, a customer is to be provided with additional instructions by a shop
assistant or to contact our advisers at: theshermandecor@gmail.com