Installation Guide

then seal the bottom
with the base cloth by
screwing in about 1/2
of the position shown
in picture 6 with long
screws and tighten the
feet.
Install the left armrest
in the same way.
You did a good job and
get yourself two nice
seats with armrests like
they are in picture 8
and picture 9.
8.
9.
Step B Install the
middle seat.
Details:
First fasten the
small corner part on
the backrest as
picture 10, and then
connect it with the
middle seat cushion.
Next install the side
board on the left
and right sides
under the middle
seat with a small
corner part and a
No. 2 large corner
part. And then seal
the bottom with the
base cloth by
screwing in about
1/2 of the position
shown in picture 13
with long screws
and tighten the feet.
10.
11.
12.
13.
14.
15.