Installation Guide

PRODUCT INSTALLATION

1、Connect the power cords correctly,then slip over the pole and tighten the locking bolts.

2、Remove the slipfitter cover, screw off the adjustable bolt and adjust the fixture angle according to needs, then

tighten the adjustable bolt and install the slipfitter cover.

1、Drill the holes on pole as the position on the plate(See Plate Dimmension), screw off the plate and install it in the

pole, fasten the bracket on the pole through the plate.

2、Screw off the wire box cover and connect the power cords in it correctly, then tighten the cover screws.

PAGE 1
PRODUCT INSTALLATION 1、Connect the power cords correctly,then slip over the pole and tighten the locking bolts. 2、Remove the slipfitter cover, screw off the adjustable bolt and adjust the fixture angle according to needs, then tighten the adjustable bolt and install the slipfitter cover. 1、Drill the holes on pole as the position on the plate(See Plate Dimmension), screw off the plate and install it in the pole, fasten the bracket on the pole through the plate.
PAGE 2
PRODUCT INSTALLATION 1、Drill the holes on pole as the position on the plate(See Plate Dimmension), screw off the plate and install it in the pole, fasten the bracket on the pole through the plate. 2、Screw off the wire box cover and connect the power cords in it correctly, then tighten the cover screws. 1、According to the bracket hole position ,drill holes on the wall and fix the bracket on the wall through expansion screw， connect the power cord correctly.