Assembly

GC24t-1 Grain Cart assembly
-26-
STEP - 50
STEP - 49
Install the {1} rear slope splice plate & the {2} side slope splice plate. Use (10) M10 x 25MM serrated
hex head bolts and (10) M10 serrated hex ange nuts to attach them to the gearbox assembly.
Install the {3}inside sheddar panel splice plate. Use (10) M10 x 25MM serrated hex head bolts and (10)
M10 serrated hex ange nuts for attachment.
Before installing another panel tighten hardware on the lower panels and gearbox splice plates.
Install the rear lower sheddar panel. Use (18) M10 x 25MM serrated hex head bolts and (18) M10 ser-
rated hex ange nuts to attach the rear lower sheddar panel to the shell assembly.