Assembly

GC24t-1 Grain Cart assembly

-4-

STEP - 6

STEP - 5

Place the front leg onto the main frame using an overhead hoist. Use a drift pin to help line up the holes.

Attach the front leg with (8) M24 x 75MM hex head bolts, M24 washers, and M24 nylon locking nuts.

Note: Do not completely tighten. The legs will need to be able to slide for adjustment in a later

step.

Place the rear leg onto the main frame using an overhead hoist. Use a drift pin to help line up the holes.

Attach the rear leg with (12) M24 x 75MM hex head bolts and (12) M24 nylon locking nuts.

Square up plates with frame then tighten.

M24 Washer

M24 Lock Nut

m24 x 75 mm Bolt