Setup

-9-
NOTE: This is a general list of parts for a leaner with tarp, so some of these will be already installed
on arrival or installed in sideboard set up. The purpose of this list here is to provide a visual aid along
with the previous page.
Detail # Description Quantity
1  Tarpcrankhandle      1
2  1”schedule10x198”longpipe    1
3  1”x1”14gax192”longsquaretubing   1
4  Dripedge       1
5  SpringReturn       1
6  RearEndCap(BoltTogether,NoWindLip)  1
7  FrontEndcap(BoltTogether,WindLip)   1
7-1  RearShortEndCap(BT,NWL,4’Long)   1
7-2  FrontShortEndCap(BT,WL,4’Long)   1
8  *Bows     
  1326’s       8
  1000’s,1050’s,1150’s     7
  620’s,750’s,875’s      4
  525’s        3 
9  3/16”DiameterRidgeCable     3
10  3/8”-16CenterlockHexNut     11
11  3/8”-16x2”HexBolt     5
12  StopBracket       3
13  1/2”-13x11/4”HexBolt     1
14  1/2”-13CenterlockHexNut     1
15  Hangerbrackethook      1
16  Hangerbracket      1
17  3/8”-16x1”SerratedFlangeHexBolt   17
18  3/8”-16SerratedFlangeHexnut    17
19  Cableclamp       6
20  1/4”-20CenterlockHexNut     9
21  1/4”-20x3/4”SerratedFlangeHexBolt   4perBow
22  Unviersaljoint      1
23  1/4”-20x21/2”HexBolt     1
(PartsNotShown)
24  1/4”x3/4”SelfTappingBolt    10
25  1/4”driverivet      8
26  Canvastarp       1
27  PlastEndCapRailAttachment    1
28  1/4”x11/2”SelfTappingBolt    4
29  1/4”x5/8”ButtonSKTCapScrewZinc   5
30  1/4”x1/2”ButtonSKTCapScrewZinc   22
31  1/4”SerratedFlangeNutHard&Zinc   27+4perBow
32  PlasticJ&MStandoffs     2
33  J-bolts       6
34  PropUpBar(2Piece)     2
35  1/4”-20x3/4”HexBolt     8
LEANER MODEL GRAIN CART TARP INSTALLATION