Installation Manual User guide

J.P.Instruments Fuel Flow Installation Manual Report # 503
for EGT-701 with Fuel Flow Option Page 13 of 14
Rev B : Date 03/14/97
Connect to 15 pin D-Sub
connector on the EDM-
700
Fuel Flow differential Module (FFDM-1, -2 )
Used with carbureted engines with a Fuel
Return line (pressure carburetors).
1
2
3
Power not required
on the FFDM-2
taken from EDM-
700
J.P.INSTRUMENTS
PO Box 7033
Huntington Beach CA 92646
Title: FFDM-1 Interconnect Wiring Diagram
Drawing No. 700920
Date
02/14/97
Drawn Approved
Sheet
1 of 2
Rev NC