Installation Manual
FAA APPROVED INSTALLATION MANUAL FOR THE EGT-701 Report 103 
INSTALLING THE EGT-701 SCANNER® 1/20/09  Rev-E Page 17 of 30 
has been removed and reapplied to the EGT-701. The entire display dims automatically depending on the ambient 
lighting. 
20) Component Parts List for EGT PN-1280, TIT PN-1200, IAT PN-1300 Probe in polybag 
1 Thermocouple probe PN M-111 
1 Stainless Steel Clamp Thimble 
1 Stainless Steel Exhaust Seal Washer 
1 Stainless Steel Screw Type Clamp 
2 Ring Terminals 
2 Screws and nuts 6-32 X 1/4 
1Fiberglass tube 1/2” X 4” 
21) Component Parts list for CHT probe PN 1260 
1 Bayonet Probe Spring loaded PN-5050 
1 Or Gasket thermocouple probe PN M-113 
2 Ring Terminals 
2 Screws and Nuts 6-32 X 1/4” 
1 Fiberglass tube 1/2” X 4” 
22) Components Parts list for OIL probe PN 1240 
1 P/N 400505 –C or –L, OIL probe 
2 Ring Terminals 
2 Screws and Nuts 6-32 X 1/4” 
1 Fiberglass tube 1/2” X 4” 
22) Components Parts list for OIL pressure PN 306018 
1 P/N 306018 OIL pressure transducer 
2 Ring Terminals 
23) Components Parts list for OAT probe PN 1220 
1 P/N 400509, OAT probe 
2 Ring Terminals 
2 Screws and Nuts 6-32 X1/4” 
1 Fiberglass tube 1/2” X 4” 
24) Components Parts list for Manifold pressure sensor probe P/N 604010  
1  P/N 604010, Manifold pressure sensor with 1/8 NAP termination. 
25) Components Parts list for RPM sensor P/N depends on Magneto make and model. 
1)  Bendix magneto series 20,21………………….…P/N 420806 
2)  Bendix magneto series 1200,………………..…...P/N 420807 
3)  Bendix magneto Plug Std and Dual ……………...P/N 420815-1 
4)  Slick magneto series 4000 or 6000 P/N 420809 or Plug PN 420815-2 
26) Component Parts list for Single Engine, EGT and CHT  
P.N. EGT-701   -4C   -6C  -7C -8C -9C 
Temperature Indicator  1  1  1  1  1 
EGT probe KIT PN 1280  4  6  7  8  9 
CHT probe KIT PN 1260  3  5  6  7   
CHT Gasket probe KIT PN 1260  1  1  1  1  9 
Oil probe with option O KIT 1240  1  1  1  1  1 
TIT probe with option T KIT 1200  1  1  1  1   
OAT probe with option A KIT 1220  1  1  1  1  1 
IAT probe with option I KIT 1300  1  1  1  1  1 
Oil pressure transducer PN 306018 1 1 1 1 1 
MAP P/N 604010  1  1  1  1  1 
RPM one of P/N 420806, 7, 9, 15-1,-2  1  1       
TC Harness PN 700702  1  0  0  0  0 
TC Harness PN 700700  0  1  1  1  1 
TC Harness PN 700200  1  1  1  1  1 
TC Option wire PN 700201  0  0  2  4  6 










