Manual

J. P. Instruments has a
downloadable data transfer
application program for the
Palm series called EzPalm™.
Downloading the EzPalm
Program from the Internet
Go to our web page
www.jpinstruments.com, go to
the downloads page. Double click on EZPALM2.ZIP.
Transferring Data from the EDM-760 to the Palm Handheld
To transfer recorded data to your Palm Computer, proceed as
follows:
1. Connect the Palm Computer cradle or travel cable option
(available from Palm Computing) to the JPI Palm Download
cable (gray). Insert the small round plug of the JPI cable into
the data connector on your aircraft instrument panel, and the
cradle or travel cable to the Palm Computer.
2. Simultaneously hold the STEP and LF buttons for five
seconds. You will see the word PROGRAM for two seconds.
Tap the STEP button until you see the question DUMP? N.
3. Tap the LF button once or twice to select either NEW or ALL.
• NEW will transfer only data newly recorded since you last
saved your data.
• ALL will transfer all the data that is in the EDM memory.
In either case, no data will be erased from the EDM.
4. On the Palm Computer, tap the EzPalm
icon.
5. Tap the EzCapture™ button. The Palm Computer will
wait a few seconds for you.
For Your Safe Flight Page 35
EzPalm 2
JPI