Instructions User Manual

ManualsBrandsJ.P. Instruments ManualsEquipmentEDM 960 Twin ICA

EDM-960 Instructions for Continued Airworthiness Rev A

Date 4-8-2014 Page 1 of 6

J.P.Instruments Inc.

3185B Airway Ave

Costa Mesa CA 92626

714 557 3805 Fax 714 557 9840

EDM 960

Instructions for Continued Airworthiness

Supplement No: 960-01

Revision: IR

Prepared by:

___________________________ 02/06/2014

Joe Polizzotto

Before performing any procedures contained in this manual

the user should verify they have the latest ICA revision.

Please check web site at www.JPInstruments.com

for the latest revision of this manual.

The registered owner on file at JPI will also be notified of any changes.

Summary of content (6 pages)

PAGE 1
EDM-960 Instructions for Continued Airworthiness Date 4-8-2014 Rev A Page 1 of 6 J.P.Instruments Inc.. 3185B Airway Ave Costa Mesa CA 92626 714 557 3805 Fax 714 557 9840 EDM 960 Instructions for Continued Airworthiness Supplement No: 960-01 Revision: IR Prepared by: ___________________________ 02/06/2014 Joe Polizzotto Before performing any procedures contained in this manual the user should verify they have the latest ICA revision. Please check web site at www.JPInstruments.
PAGE 2
EDM-960 Instructions for Continued Airworthiness Date 4-8-2014 Rev A Page 2 of 6 Revision History .................................................................................................................. 3 List of Effective Pages ........................................................................................................3 Distribution of Revisions......................................................................................................3 1.0 Introduction ...................
PAGE 3
EDM-960 Instructions for Continued Airworthiness Date 4-8-2014 Revision History Rev A Page 3 of 6 REVISIONS Rev. IR A Reason/Description Requested/ Changed By Date Complete Document N/A 02/06/2014 Removed duplicate Airworthiness Limitations in Section 18.
PAGE 4
EDM-960 Instructions for Continued Airworthiness Date 4-8-2014 Rev A Page 4 of 6 2.1 Display Unit Pn 790000-C The EDM-960 receives, processes and displays the Serial data on a VGA TFT color display. In addition, the EDM-960 receives GPS data. The EDM-960 also transmits fuel flow and OAT data to a GPS and controls the external Master Caution Message Center (RAD) Remote Access Display. 2.2 Data Acquisition Unit (DAU) EDM-950 The EDM-950 is a 5.25" x 5.25" x 1.
PAGE 5
EDM-960 Instructions for Continued Airworthiness Date 4-8-2014 Rev A Page 5 of 6 4.0 Control & Operation Information All of the engine and aircraft functions monitored by the EDM-960 are displayed on the Display Unit after power-up. There are no other display screens. Fuel Level calibration is performed during the initial installation of the EDM-960 and should not require recalibration. Changing or repairing the EDM-960 display and/or EDM-950 will not affect fuel level calibration.
PAGE 6
EDM-960 Rev A Instructions for Continued Airworthiness Date 4-8-2014 Page 6 of 6 11.0 Servicing Servicing is “on condition” only. There are no field adjustments or calibration requirements for the EDM-960 system after it has been properly installed, checked off and signed-off by the respective authority. All servicing of the EDM-960 system and accessories must be accomplished by J.P.Instruments Inc. (JPI).