Installation Manual Owner's manual

FAA Approved Installation Manual for the EDM-960 system Report No 909
Primary Engine Data Management System Page 25 of 46 Rev D
Date 2-6-2014
8. Tap TABLE. You see ‘Fuel Table Data’ ( White at top of screen) with a table. You may change any of the fuel levels
in the left column except for empty. You will enter the readings taken previously on paper into the right column.
9. Tap/hold STEP to select the cell you want to edit. Tap EDIT to change the value. Tap or hold Modify to change digit.
Tap digit to change another part of the number.
10. Tap SAVE to record it. Follow the on-screen menus to edit the value. Repeat previous step until all tanks data have been
entered.
11. You see ‘Save fuel tank data?’. Answer SAVE to store all final data values or CANCEL to return to table editing. To
complete the process, tap SAVE a second time.
30. GPS Interface
The GPS is wired to the EDM-960 head. Refer to the Manufactures GPS manual for the required pin connections on
the GPS.