User's Manual

J Plus, Inc
www.juniglobal.com J Plus Proprietary and Confidential 27/88
7 Web GUI Operation
7.1 Web GUI Menu
Table 11describes each menu where the user can configure and check the setting of JLT622P.
Menu Tree
Description
>Configuration
>> General
>>>Network Interface
Add, modify, and delete Network Interface. Configure IPv4/6, DHCP/Static IP and
Vlan
>>>Network Function
Configure Vlan in each Interface
>>>Security Gateway
Enable or disable Security Gateway.
>>>DHCP Server
Enable or disable DHCP server in LAN port
>>>CWMP
Enable or disable CWMP for connecting HeMS and configure IP address of the
HeMS as well.
>>>Clock sync &
Sys time settings
Configure clock sync mode (GPS or IEEE 1588v2) and NTP information. Also, Air
sync operation is configurable.
>>>WAN port
Configure Ethernet port information.
>>>Statistics Report
Configure the server information to which statistics data is uploaded.
>>>Optional Setting
Configure the Host name and IP address of the LAN port.
>>> Static Routing
Configure static routing information if necessary.
>>> SAS
Configure SAS if necessary
>> PKI
>>>eNodeB
Configure eNodeB private key and certificate information.
>>> CA Certificates
Import CA certificates.
>>> CMPv2
Configure CMP server information and select CMP request option.
>> LTE
>>>Basic
Configure basic eNodeB information including Cell ID, TAC, PCI, PLMN ID,
EARFCN and TDD configurations etc.
>>>RF
Turn ON or OFF RF transmission and set the maximum transmit power for each
antenna port.
>>>S1AP
Configure MME information.
>>>MR
Trigger quantity and threshold values can be configured.
>>> LA
Configure Link Adaptation settings.
>>> Neighbor Cell
Neighbor Cell configurations can be configured.
>>>UTRA Frequency
UTRA Frequency configurations can be configured.
>>>UTRA Neighbor Cell
UTRA Neighbor Cell configurations can be configured