User's Manual

J Plus, Inc
www.juniglobal.com J Plus Proprietary and Confidential 34/88
7.2.1.3 Security Gateway
When JLT622P is connected to the environment where IPSec is enabled, Security-GW must be enabled and the
user need to configure its IP address as shown in Figure 21
Figure 21: Security-GW IP Address Configuration
7.2.1.4 DHCP Server
From the tree menu, select DHCP Server to move onto the DHCP server page for configuring enable/disable of
DHCP. After changing DHCP Server and click Apply, the new configuration must be saved.
7.2.1.5 CWMP
From the tree menu, select CWMP to move onto the CWMP Setup page for configuring enable/disable of CWMP
and HeMS server IP address. After changing the HeMS server address and click Apply, the new configuration
must be saved.